Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Welcome to the quiz portion of Mouth, Meet Money: Case Studies of Outcome-Based Design!

Important: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course, participants will be... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

SDLers – For one of our projects we are working with local tribes to procure timber. We would also like to get FSC certification, but haven’t found significant overlap between these two criteria in the Pacific Northwest. There appear to be two certification entities in our area: Northwest Natural Resource Group and Trout Mountain Forestry.  I’m... Read more

Hi everyone! Our sister company, Flatiron, is a heavy civil/infrastructure contractor based out of Broomfield, CO. Their sustainability team is on the hunt for a Circular Economy Manager. Our companies recently announced exciting public ESG and climate commitments, including several related to waste reduction, life cycle assessments, and more... Read more

Hi all,

Just wanted to put a couple of useful webinars on your radars if you haven't heard of them yet:

#1: The Contractor’s Role in Quantifying and Reducing Embodied Carbon: Why, What and How

This webinar will provide an overview of what a contractor's role is towards embodied carbon reductions, and how two General... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

Hi folks,

On behalf of ILFI, I'm sharing a notice that the early registration deadline for the Living Product Expo in Pittsburgh is tomorrow! This is a great event for anyone interested in a deep dive into materials transparency, hazard avoidance, low-carbon products, overall innovation, and the Living Product Challenge. There will also... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

Hi All: I'm writing to see if I can get some recommendations/links to some great, free web tours of sustainable projects for use in an intro to sustainability class I'm teaching online this fall. Typically we tour some local buildings but that isn't an option this year. I'm hoping to find a few different ones for students to choose from. They... Read more

Hello Sustainable Advising Leaders,

Happy 2022! Here's your reminder that this network's first monthly call of the year is next Tuesday, January 25 at 3pm ET. Zoom call information is below.

All members of the network are welcome! You can see the agenda here. Here's a quick preview:

Welcome to the quiz portion of Finding Products for LEED v4—A Guide

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe ways in which the LCA approach is gaining ground in LEED v4 and how the transition is reinforced by manufacturer transparency and disclosure.
2.... Read more

Kelly provides administrative support to BuildingGreen projects, including major contracts as well as event planning, and logistics coordination for BuildingGreen’s network of sustainable design leaders. Among her projects, Kelly coordinated a large tri-state regional economic development project focused on the green goods and services industry... Read more