We are looking to refine our general office specifications to weed out harmful materials and to prioritize sustainability for all of our clients. Have you had good experience with outsourced specification writers who are helping to push sustainability forward? Who do you recommend? Bonus points if they are familiar with Massachusetts codes and... Read more

Hi Everyone!

I am now in my last week in the Bay Area, and in my last three weeks at (my first 15 years at) SERA, as I will be leaving on my extended sabbatical at the end of April!

I will miss following this group's dialogue, and will especially miss attending the summits for the next couple of years! 

My colleagues Mark... Read more

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

Hello fellow SD leaders,

This is a quick note to re-introduce myself to this group. I am a lapsed member from the original tribe of 2008 who has found my way back on a trail of bread crumbs left by Nadav (thanks Nadav!). I'm just glad to be back amongst my people, sharing and learning from you all, as we help each other to get where we... Read more

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

asdfasdf

Welcome to the quiz portion of The PVC Debate: A Fresh Look.

Learning Objectives
Upon completing this course, participants will be able to:


1. Examine the actual cost-effectiveness of PVC in terms of quality.
2. Explain what makes PVC a health hazard.
3. Recognize market effects of PVC's durability and... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

With depth of thought and a broad view of the horizon, Candace Pearson can take a nuanced vision and sharpen it into focus, propelling the team around her forward. Operating in all three of BuildingGreen’s service offerings—publications, consulting, and peer networks—she finds pragmatic ways to fundamentally shift how we create our built... Read more

Hello, 

Does anyone have experience with USGBC's Green Training Pilot Credit, and/or use of an innovation credit for subcontractor training? I was going to propose training to our subs on becoming an EnviroStars Businesses (WA Green Business Program) and also tie in the Sustainable Contractor's Commitment/project goals.

Since... Read more

Hi folks,

If you're registered for the Summit, you should have gotten this message from me separately, but I wanted to post it here too to be sure. It would be great if everyone coming from out of town could stay together! We've achieved critical mass in terms of Summit participants--this is going to be a great and impactful gathering!... Read more

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more