Hello, All!  We haven't run WBLCA on a project that may include electrochromic glazing before, and it's embodied carbon footprint is really high in comparison to a more traditional double or triple pane IGU (we thought it would be higher, but this is 3-4x higher).  The EPD we have from Sage Glass for their triple pane electrochromic lists a GWP... Read more

Hi All,

Attached is the DRAFT of our ZNE Data Report.  It is just the beginning. We have a lot more data to gather.  We didn't want to wait for it to be perfect to get it out. Hopefully this gives you all an idea of where we are headed.  Please continue to send us your projects in the Northeast.  I've also attached the excel doc for you... Read more

Hi All! This is a question for NYC and surrounding area (but if its the right fit, could extend beyond)! 

Can anyone recommend a designer for healthy and sustainable furniture for an affordable housing development?  The spaces that need funiture are: a community facility, common spaces, and residential units (for formerly homeless). ... Read more

Welcome to the quiz portion of Engineering a Wood Revolution

Learning Objectives
Upon completing this course, participants will be able to:


1. Compare engineered wood to steel and concrete; and describe how engineered wood offers better dimensional stability, less waste, and more consistent performance than... Read more

All,

I think there may be more than a few people interested in an article I co-authored titled Comparative whole building life cycle assessment of renovation and new construction. It is now available in the journal Building and Environment. Fortunately we have a link that gets you past the paywall that is good for 50 days. If you have... Read more

Hello Gurus!

The City of Cambridge is expanding on its 2015 NZ Climate Action plan to focus on embodied carbon.

If any of you have experience conducting LCA/WBLCA (whether you are an architect, engineer or consultant) your input is invaluable. The City is looking for feedback so that they can shape the program, as it evolves, to... Read more

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

Calling all Sustainable Design Leaders - Coming up on March 1st, we’re hosting a virtual SDL check-in. We’ll have a round of five-minute presentations as well as a refresh of the SDL Steering Group.

Quick point of clarification: For those who’ve been around for a while, you may remember this group as the “SDL Regional Leaders”. As we’ve... Read more

Hi folks,

With all the build-up to Greenbuild (don't miss the Tuesday Show-and-Tell if you'll be in town!), I nearly forgot about another opportunity, coming up sooner! A bunch of us will be in Cleveland in early November for the first Building Resilience conference that BuildingGreen is helping to organize with ILFI and the Resilient... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

You’ve probably heard that wood products are carbon neutral. You might also have heard that timber harvesting causes immense carbon emissions.

Which is it?

Could it be both?

Hello Sustainable Design Leaders,

I am thrilled to be joining such an esteemed collective of driven thinkers and doers. I look forward to meeting some new faces and reconnecting with some familiar ones in an effort to advance sustainable design in the built environment.

Thanks,

Jonce

At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set.  This is something I had not previously considered, but would like to learn more about. 

If you work for a design... Read more

Welcome to the quiz portion of Design for Adaptation: Living in a Climate-Changing World.

Learning Objectives
Upon completing this course, participants will be able to:

1. Identify the major known causes of climate change
2. Describe the range and reliability of predicted temperature changes.
3. List... Read more

Hello SDLs!

Here are presentations from last week's 2018 SDL Summer Summit Show & Tell Presentations.

Best,

RoseAnn

test

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, Using a Circular Economy as a Framework for Zero Waste, Zero Energy + Zero Carbon. We hope you will join us!

Register HERE.

Using a Circular Economy as a Framework for Zero Waste, Zero Energy + Zero Carbon
Monday, August 23rd, 2021
... Read more