Poppy Gasbag

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

This report is no longer being sold.

If you have questions, please contact customersupport@buildinggreen.com

Whether you're selecting windows for a 99-unit condo project or for a single-family home, you're making a choice your client will have to live with for years, maybe decades.

And no matter how large or small... Read more

Hello friends. On a current school project, an abuse resistant wall covering has been proposed as an alternative to our typical MDF wainscot. The proposed product has been used successfully in healthcare, and switching to it will save the project almost $1million, which is no small amount when the project is over budget and 7-figure cost... Read more

Welcome to the quiz portion of Shoebox Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the difference between a shoebox model and a whole-building energy simulation.
2. Approach shoebox modeling according to project type and software tool.
3.... Read more

Has anyone done a LEED Homes and a NGBS certification and have insight into the differences, challenges, etc between the two?

Hello Sustainable MEP Leaders!

Here at BuildingGreen we are excited and looking forward to creating a valuable and engaging online summit with you all for 2020!

You can Register Here as well as review important information. The dates to mark on your calendars are June 9 - 11, 2020.

This is a crazy time, full of uncertainty... Read more

Hi Fellow SDLers: Just wanted to make sure everyone saw the terrific initiatives that the White House announced last week:

https://www.whitehouse.gov/ceq/news-updates/2021/05/17/fact-sheet-biden-administration-accelerates-efforts-to-create-jobs-making-american-buildings-more-affordable-cleaner-and-resilient/

Maybe some impact from... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Hardware has to be durable and resist weathering to ensure that features such as doors function properly.

BuildingGreen-Approved Hardware

BuildingGreen approves hardware that uses post-consumer recycled metal content beyond what is standard in the industry. Products from manufacturers that have engaged in information transparency... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

Hi folks,

I wanted to let people know about this webinar--I've heard it's good. If you do catch it please let us know what you think. Jason has offered to do a private version for our Peer Networks as well--I'd love to know how interested people would be in that opportunity.

November 14, 2019 from noon to 1 PM Pacific Time

... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Welcome to the quiz portion of The Beneficial Intersections of Energy, Resilience, and Health.

Learning Objectives
Upon completing this course, participants will be able to:

1. Determine and communicate the financial benefits of energy efficiency, climate resilience, and occupant health and wellness.

2. Understand how... Read more

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more