Wondering if anyone has a contact for good [sustainable] interactive water feature designer? A client is looking for a designer to add to our team and I figured this network would certainly have some insights. Project will be located in Omaha, NE. 

Hi,

Has anyone used a sustainable product that complies with the EQc Low-Emitting Materials requirement that is a general construction adhesive similar to Liquid Nails? I've checked the Mindful Materials website and can't find anything. I found Red Devil General Prupose Construction Adhesive on UL Spot, but have never used it before. Any... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Good morning:

I am hoping someone can point me in the direction of any higher ed campus standards or policies focused on plug load management, occupant behavior related to energy, etc. I'm especially interested in any examples of communications to faculty or students encouraging behaviors that reduce energy consumption. Thanks!

As some of you know, BuildingEase is the first (FREE) platform focused on building products that combines a workflow tool, waste exchange and marketplace (yes, you actually buy it all right from the site!).

The platform saves tons of hours, major headaches and streamlines workflow within a firm and across a team.

We are going to... Read more

The NYC SDL Group met to discuss the recent SDL Summit Report. The North Star tenant "About the well being of all species" spurred discussion of an example of building's impact on other species: bird collisions. Links to some resources to address this issue are below. Feel free to ask me and/or Stefan Knust about it. We would be more than happy... Read more

Hi, I've been following the copper piping discussion and am wondering if copper piping has been a problem in greywater systems.    We've used Aquatherm to some extent in greywater treatment.

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

I’m working on a hospitality project with a large scale farm to table operation, and I am concern about land space and agricultural practices. I'm looking for someone that can advise us on how to establish good agricultural planning and practices. The project is in Utah.

Has anyone work with consultants or academic group focus on this?... Read more

Hello friends,

Recently, as part of the AIA 2030 working group discussion – a topic came to light that was a conversation among (I believe) the SDL subset of our community, on a topic that is my personal obsession and daily focus – so I wanted to pipe up and share thoughts. BUT I want to respect the safe space, so if those of you in SDL... Read more

Hi Everyone -

I just received this note from Don Horn at the GSA (Deputy Director, Office of Federal High-Performance Buildings):

"Here's another installment of our work to reduce emissions through GSA's actions. GSA issued a press release this morning announcing our new standards for low carbon concrete and environmentally... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

Hi folks,

Registration is now open for the SDL Summer Summit. We expect this one to fill up, so if you plan on coming don't wait too long to register.

As usual, those of you who are coming will help set the agenda. We reviewed some ideas yesterday with the Steering Committee and agreed that some topics from January's Winter Summit... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more