Show & Tell Break-out Session: Post Occupancy Evaluations and Occupant Behavior

Presentations: 

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings; 
2. Explain why certain materials make more sense than... Read more

Hi folks,

We had a great conversation about this today, following up on a past agenda item that we didn't get to, but that Kim wrote about a few weeks ago on a different thread. He said:

We didn't get to item 7:  "Question about company size as a qualification for the network".  I'd like to offer this input:  I'd like to open it... Read more

Charlotte has been the lead customer service representative at BuildingGreen for 25 years. 

Having been involved in the nuts and bolts of customer service and accounting throughout various phases of the company’s development, Charlotte’s historical knowledge is immensely helpful to BuildingGreen’s staff and customers. Customers know her... Read more

Hi Friends - I'm sure you've started to see news and posts from personal contacts about the shortage of masks, gloves and other PPE for hospital workers. Our company GCI General Contractors is pulling what we can to donate locally. Please urge your leadership to do the same! I just talked with a dear friend who is an infectious disease... Read more

All,

I am on the Board of an Environmental organization in the Catskills (The Catskill Center for Conservation and Development https://catskillcenter.org/).  We are trying to develop a policy on siting of clean energy projects.  For example, we know of one town that bans PV's that can be seen from the road, another is a proposal to... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Welcome to the quiz portion of Lighting Design for Health and Sustainability: A Guide for Architects​!

Learning Objectives
Upon completing this course, participants will be able to:


Describe how high-quality lighting design dovetails with sustainability by improving energy efficiency and supporting occupant health and... Read more

Does anyone have install experience with Duracryl yet? I'm looking at it for a large project in place of Marmoleum. We've had multiple instances of install failures with Marmoleum, which leads to lots of finger pointing. 

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Hi,

HKS is seeking two seasoned sustainability leaders to be part of the DesignGreen Team embedded into either our Mission Critical and Commercial Mixed Use practice. In general, the role is to service clients and drive sustainable design quality forward. We have a great team and need even more wise, energetic, creative, and committed... Read more

Hello, all! I'm working on an in-depth article about adaptive thermal comfort. I'm looking for interviewees who have real-world experience of working with ATC on a project, including occupant feedback. If you have that kind of experience, I'd love to hear from you!

This is happening on a very tight timeline, so please get in touch with... Read more

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Hello Everyone!

Please mark your calendars and stay tuned for more information regarding an All Peer Networks 2020 Summit Season Closing August 10th, 3-5pm ET (Noon-2pm PT).

Register HERE to get it on your calendar! The staff at BuildingGreen are looking forward to planning a fun and engaging cross-network event focused on this... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more