Has anyone used the new 3M Smog-Eating Granules on a roof before? Malarkey and Soprema are offering this as an option for their roof shingles. Seems like a great technology for urban areas, but I'd be curious to see if anyone here has actually successfully specified and installed it.

https://www.3m.com/3M/en_US/roofing-granules-us/... Read more

Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

Hello Everyone!

We’re beginning to plan events for the rest of 2021, which means we need your input to make sure we are putting together structures and content that are most valuable for you.

Please take a moment to take this brief survey DUE June 25th! You will find details on our current thinking for these events within the... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

Cabinets are often made from unsustainable wood bound with adhesives that offgas formaldehyde and finishes that have high emissions or contain PVC.

BuildingGreen-Approved Cabinetry

Approved residential cabinetry has:

Sustainably sourced wood or fiber—either salvaged or FSC certified and verification of low... Read more

Welcome to the quiz portion of Introducing Fitwel v2.1!

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the purpose of the Fitwel standard, including how it advances the goals of health and well-being of building occupants—as well as public health.

2. List nine ways in... Read more

Healthcare Design, one of the most respected and widely recognized trade journals in the health care AEC space has released the names of its 2022 HCD 10 winners.  The mission of The HCD 10 is to recognize and celebrate the broad spectrum of outstanding professionals in that industry and the influence they have on healthcare design.

One... Read more

Hi folks,

BSR/ASHRAE/ICC Standard 240P, Quantification of Life Cycle Greenhouse Gas Emissions in Buildings, is out for Public Review until March 18. It covers what construction activities have to be tracked and reported and provides placeholder values to use during design. If you have input or suggestions on what would be needed to make... Read more

Welcome to the quiz portion of Doing Daylighting Right.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain occupants' needs and habits when it comes to daylighting.
2. Recognize at least three recent mistakes in daylighting design and their respective alternatives going... Read more

BuildingGreen Team Memberships Give your team access to the ultimate green resource for designers.

Is your team ready to increase its sustainability knowledge? A team membership allows colleagues to work and learn collaboratively. We offer 10-person, 20-person, and 30-person team memberships. Make BuildingGreen your team's all-in-one... Read more

Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more

Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

Hi all,

I have asked a few of you in this list, but thought I might expand the question to the wide group.

To ensure that your firm will be able to collect post-occupancy energy data from your completed projects, have any of you included language about sharing energy data during operations in an owner agreement/contract? We have... Read more

We just wrapped up an awesome Winter Summit at Gulf State Park in Alabama. I'll be posting flip chart pages and notes here--we can use this forum to continue the conversations. 

Apologies for the flurry of emails, but it seems best to start separate threads for each topic. If you'd rather limit the flow, you can switch to daily digest... Read more

Axel Slowin

We are working on a large, commercial, LEED project in the Wash DC area, and the Construction Management firm needs LEED administrative/documentation assistance on their end of the process.  The construction is underway but the CM lacks the staff. 

Can anyone suggest a LEED consultant in the DC area that can work for the CM -- managing... Read more

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more