...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Hi All -

I am looking for recommendations for a car charging station for a Catholic convent project we are working on. At this time, the client has requested either 2 charging stations or one station that can charge 2 vehicles. I've been researching chargers and am thinking that it does make sense to specify a commercial-grade charging... Read more

Hi Gurus,

We are having a hard time sourcing a baby changing table that is free of anticmicrobial coatings. KoalaKare, the predominate manufacturer, includes Microban in both their plastic and stainless steel product options.  Does anyone have any experience with a durable, ADA compliant and readily available baby changing table free of... Read more

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

Welcome to the quiz portion of Building as an Organism: Understanding the Integrative Process Credit in LEED v4 Projects (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why integrative design is the key to cost-effective, high performance green buildings and LEED... Read more

Jennifer is part of the Peer Networks team at BuildingGreen. Her Connections Catalyst role for the Sustainability Leaders networks includes events planning and bringing in new members.

Jennifer’s experience before BuildingGreen includes two years working with AmeriCorps Cape Cod on outdoor environmental projects; a year teaching... Read more

Hi Everyone,

Please mark your calendars for next Tuesday, March 17th, 2020 3pm ET (Noon PT) for an SCL webcast with Mark Chen at Skanska and Emi LaFountain at Turner Construction on Quantifying Jobsite Carbon Emissions. 

Description:

Quantifying Jobsite Carbon Emissions w/ Turner and Skanska
The focus of embodied... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Hello Green Gurus,

On October 5th a number of Sustainable Design Leaders gathered for the Fall 2021 SDL Virtual Summit and the BuildingGreen team is happy to now share with you all the event report here!

This report can be shared publicly. If you think someone would like to see it, such as firm leadership or prospective Peer... Read more

Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

Hi All,

Sasaki is hiring a Director of Sustainability and Resiliency.  See attached.  Please forward along to folks who might be interested.

-Meredith

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

In trying to help a client write a case study on avoided carbon by using slag and flyash, I am having trouble finding a one for one equivalency that can be verified.

I have found for one pound of flyash, one pound of carbon is saved - but I can't verify that.

Appreciate the feedback!

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more

HI MEP Leaders,

Related to our thread about equipment needed for decarbonization, I have a question about what new or improved equipment is already available now that you're excited about.

Every year we at BuildingGreen publish (and present at Greenbuild) a listing of the Top-10 new and exciting products. Our focus this year is on... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more