Hi all!

NESEA's BuildingEnergy Boston is happening March 28-29 at the Westin in Boston's Seaport. Would anyone like to meet up there? There are a few happy hour-like events we could meet at in the Trade show space or I'm open to other ideas! Let me know if you're interested. Here is more info: https://nesea.org/conference/buildingenergy-... Read more

We're looking to expand our design performance group - let Peter or me know if you have someone to recommend to us! Here's the description. 

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

Hello. Has anyone tackled "tracking emissions from all company-purchased cloud computing" yet? This is in the best category for CC 2.0 and wanted to ask.

How "deep" did you go? 

This was an interesting read, but still left me a little confused about how far I need to go and even what questions to ask:   

https://medium.com/... Read more

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

A building project brings brothers back together, but a fast-moving storm challenges the project and the family.
Of storms & chins »

Whistleblowers alert state health agencies to possible foot fungus scourge... Read more

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

At our SAL call today, folks were talking about how there was just too much to read about DEI. This is the best short summary I have read about the problems of incorporating it into the organizations where we work. It's much easier to talk the talk than to walk the walk because it takes time and accountability.

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Hi All,

I've been signed up to give a Green Building Rating Systems overview presentation to Clean Energy Interns this summer.  I thought I'd reach out and see if anyone has an updated overview presentation like this already pulled together that they'd be willing to share. It's been a while since I've given a presenation on this topic. ... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate