Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Huge shout out to Patty Lloyd, Luke Leung, Janet Olsen, and Sarah Gudeman for their webinar on the Power of Peer Networks. They share lots of insights into the value of participating in BG Peer Networks and many others. Ten bucks to Illinois Green gets you access to the recording--I loved it. What would you have said that they didn't?

Can you comment on successful ways you have used eQUEST and pitfalls you have seen? We are considering training our architects to use it for early building analysis on all projects. 

Following up something I mentioned at the summit - the EPA is hosting public comment webinars related to the IRA and construction. The first one seems particularly relevant, 3/2/23 from 2-3.30pm EST “Reducing Embodied GHG Emissions: Construction Materials Prioritization and Environmental Data Improvement”. Good opportunity to have our voices... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Welcome to the quiz portion of Biobased Materials: Not Always Greener.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why "biobased" is too general a term.
2. List the primary concerns associated with biobased building materials, finishes and furnishings, and wet-... Read more

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

Shane, please confirm that there is a meeting this Friday (4/6) and if the time is 3:00 ET. We plan to have at least one member from our team there. Also, please forward the links/numbers for joining the meeting.

It would be helpful to know any questions you have ahead of time (if possible) so we can bring answers and what portion of... Read more

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.