Hi all,

We are taking a deep look at green accreditations within our firm. Gone are the days when we could say: "our staff is XX% LEED APs!" as a metric of firm progress. Here are a few questions we are asking ourselves, and I'm wondering how you approach this in your firms:

I've been asked to author an article on urban heat mitigation, and I wanted to include a plug for the above pilot credit, which I think is a really powerful new addition to LEED. Beyond introducing the "intent" and "credit requirements", I was also hoping to do (2) things within the article:

1) provide some feedback from those who have... Read more

Hi everyone!
I've seen a lot of claims over the years of living walls or planted buffers that can mitigate *outdoor* air pollution and have always assumed there's no real scientific basis for that idea, unless we're talking an actual forest that's 10s of feet thick. Am I wrong? Are there examples of living walls that actually have been... Read more

I know that there is a risk of starting a whole flurry of congrats through the forum, but this is a biggie, and deserves some recognition:

Congratulations Andrea and Melanie!! Huzzah!!

And a reminder--If you want to reach out to them privately, rather than through the forum, with your message, you can see anyone's email address by... Read more

They say that Louisianans are often late to the party but enjoy catching up.  The state, which had been stuck on ASHRAE 90.1-2007 (commercial) and IECC 2009 (residential) and has just adopted legislation jumping to IECC 2021 / IRC 2021, and commits to automatic upgrades with each 3-year code cycle.  This means we join CA, OR, WA, MA, and VT--... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Welcome to the quiz portion of What Makes Plumbing Green? BuildingGreen’s Guide to Plumbing Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how plumbing products affect the environment in ways that go far beyond water consumption.
2. Describe ultra-high-... Read more

Is your team ready to increase its sustainability knowledge? A team membership allows colleagues to work and learn collaboratively. We offer 10-person, 20-person, and 30-person team memberships. Make BuildingGreen your team's all-in-one... Read more

If you work on projects in Massachusetts, you are probably working under the updated MA Stretch Energy Code. While this code is doing great things pushing for electrification and very efficient buildings, it can still be tricky to implement or adjust your processes to the calculations even for seasoned pros. AIA MA in conjunction with BE+ has... Read more

Following up on the Decarbonizing Existing Building: Envelope + MEP Solutions Integrative Design Jam, a cohort of us determined a "Decision Making Tree Toolkit" that begins to classify decisions into and "if/then" framework using region, market, climate, scale of intervention, and other factors would be useful in helping us collectively move... Read more

Hi folks,

On today's call James Peterson will be introducing a conversation about how COVID might have changed our ways of working.

If there's time afterwards, we can take a look at this draft article from the USGBC research team. They're interested in our input on how we might want to analyze the info on electrification rates in... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi all!

I've heard several people talk about developing tools for assessing/codifying a client's values for a project as part of an integrated design process (ie. a set of questions, survey, etc.). Would anyone be willing to share?

(Z, are you listening? I specifically recall you mentioning a tool like this...)

Thanks!... Read more

Auto-quiz used for CEUs for attendees of the 2023 SCL Fall Summit.

All,

Some of my colleagues and I have been working to promote interest in mass timber construction for K-12 builidngs.  As part of that effort we redesigned a large high school using mass timber in lieu steel, and conducted a whole building life cycel assessment to measure the reduction in embodied carbon.  We also conducted a program-... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more