Forum topic
Hi folks,
On behalf of ILFI, I'm sharing a notice that the early registration deadline for the Living Product Expo in Pittsburgh is tomorrow! This is a great event for anyone interested in a deep dive into materials transparency, hazard avoidance, low-carbon products, overall innovation, and the Living Product Challenge. There will also... Read more
Forum topic
Hello Everyone,
On September 9th a regional cross-network group gathered for the first in-person Peer Networks event since the beginning of the pandemic. All Peer Networks were represented at this Boston Region Mini-Summit! With this first one in the books, BuildingGreen is hopeful for paving the way to future regional events across the... Read more
Forum topic
Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it?
https://www.covetool.com/
Thanks,
Esteban Matheus
Forum topic
Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item?
Forum topic
Hello,
Are you seeing any traction with LEED v4 O+M: Transit?
Cheers, Mona
Forum topic
I received this email from Cathy Higgins at NBI, and thought some of you may know the right folks who might be interested:
---------------------
Hi colleagues,
You are exactly the folks that might know a high-caliber person to join NBI’s team. We are looking for someone ideally based in California but could be elsewhere with... Read more
Forum topic
Hi Everyone,
Our Vancouver team is looking for some innovative, high performance building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more
Forum topic
On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more
Quiz
Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more
Product Guide
Exterior doors often have poor insulation and seals that allow air through.
BuildingGreen-Approved Exterior Doors
BuildingGreen has different criteria for commercial and residential exterior doors.
Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more
Forum topic
Is anyone planning on attending the WELL Conference in Scottsdale in March? I'm trying to figure out if it's worth attending or not?
Forum topic
Hello Sustainable Design Leaders,
I am thrilled to be joining such an esteemed collective of driven thinkers and doers. I look forward to meeting some new faces and reconnecting with some familiar ones in an effort to advance sustainable design in the built environment.
Thanks,
Jonce
Forum topic
Hi everyone!
My awesome colleague, Paula Melton, is doing a short talk for USGC about mass timber and wants to know if there are SCLers in the group that can share their experience. In particular:
"I’m wondering particularly about how supply-chain and cost issues are affecting availability and decision-making, and what the onsite... Read more
Forum topic
We have another great class of COTE Top Ten winners—congratulations to all of you with recognized projects. Join us on May 10 at 2:00 pm Eastern time for an inside peak at many of this year’s winners, along with insights from jurors. CLICK HERE TO REGISTER.
To keep things open and honest we won’t be recording this session. This “safe... Read more