Wood was the first material used in window frame and sash construction, and it remains popular for homes with its warm feel and relatively high energy efficiency.

BuildingGreen-Approved Windows

Wood windows must achieve an NFRC-certified unit U-factor of 0.22 or lower. Manufacturers also must demonstrate that their highest-... Read more

Hello everyone,

Here's a reminder that our next monthly call will be taking place next Tuesday, September 10th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting
https://zoom.us/j/661110941
Dial by your location
        +1 929 205 6099 US (New York)
        +1 669 900 6833 US (San Jose)... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Hello SDL friends,

It has been an amazing opportunity to collaborate with so many of you through this group or through my work with Tally, the USGBC, ILFI, and in my role as an environmental researcher at KieranTimberlake. This is not so much a goodbye as it is a "hope to see you soon." I am making a shift away from building design into... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hello everyone!  There hasn’t been much activity on this forum in recent months, so we wanted to give an update about what’s been happening and things coming up. 

Firstly, we are very excited for the upcoming inaugural SCL Summit the day before Greenbuild.  We currently have about 20 people signed up for the Summit and we are expecting a... Read more

Seeking Pros/Cons, Feedback/Commentary about signing the US Architects Declare Commitment. 

https://us.architectsdeclare.com/

Reviewing against the "shoulds" and "shalls" of the 2020 AIA Code of Ethics and Professional Conduct ... and other commitments that are out there ... any feedback welcome.

Tips for how your workflow... Read more

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

OSB subflooring typically contains formaldehyde, and wood may not be sustainably sourced.

BuildingGreen-Approved Subflooring

Products approved by BuildingGreen contain no added formaldehyde or are available with FSC-certified content.

Magnesium oxide panels, which are particularly insect and moisture resistant, are also... Read more

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

Team SCL,

This was a tough week. My husband coined a phrase "20% laid off."

Unfortunately, 50% of our business is currently impacted by governmental orders stating that our work is non-essential. This is bitter-sweet. I certainly want people to be safe, but we've had to make some tough decisions and in the geographies that were... Read more

Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.

I'm writing to pass along a... Read more