Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Hi All,

Our local COTE committee has the opportunity to meet with a local jurisdiction on meeting the targets set forth by their Climate Action Plan.  In preparation I'm looking for innovative building codes/ordinaces that address existing buildings.  I am already digging into Boston's Building Energy Reporting and Disclosure Ordinance... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Hi all,

I am on the planning committee for the National Adaptation Forum, which is an excellent conference (this will be the 6th annual) that has relatively little representation from architecture and engineering audiences. Our municipal and agency clients, as well as private sector, tend to attend this conference for climate adaptation... Read more

Someone made a tombstone to mark Internet Explorer’s end-of-support date

https://www.engadget.com/internet-explorer-tombstone-175433997.html

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Anne Hicks Harney, FAIA, has more than 30 years of experience, focusing on high-quality design imbued with a solid technical and sustainable foundation. At Long Green Specs, she provides sustainability-focused construction specifications and building material expertise to architectural firms across the country. She was chair of the AIA... Read more

Welcome to the quiz portion of Cladding: More Than Just a Pretty Façade

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how different commercial wall assemblies handle moisture.
2. Know what questions to ask to determine a cladding system's environmental impact.... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi everyone -
Some of you already have heard some or all of this news, but I thought I'd share today's press release with the whole group.
The headline is: 
SERA is VERY excited to announce that David Johnson, formerly the managing partner of Bill McDonough's San Francisco office, is now heading up SERA's bay area office.... Read more

Hello everyone! I’m happy to be re-joining the group after a two year hiatus.

Pre-pandemic I got to participate in a few winter summits when I was Sustainability Director at Overland Partners in San Antonio. I’ve recently joined Mahlum Architects in Portland and I’m excited to re-engage in the conversation, this time from the West Coast... Read more

Do you have the authority to start using only EVs in your renderings?  Let’s normalize and accelerate this change!

https://en.wikipedia.org/wiki/List_of_production_battery_electric_vehicles

Why are we showing gas cars in renderings of our green buildings?

Hello Everyone!

Wondering if anyone has expertise in Algae Photobioreactor facades? Here is a product: https://cellparc.com/

My basic understanding is that they produce heat and biogas (as well as providing shade and some thermal value.)  However, I am not clear on the GHG balance benefit, so to speak.  I cannot determine if the... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

For those who haven't heard yet, we've reached a critical milestone with the Contractor Commitment. 51% of the SCL network voted to approve the language of the current draft. That's the mark we needed to hit, so we can move forward with planning the launch! Thank you to all those who have worked tirelessly over the last two years developing... Read more

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more