A study published in the June 5, 1992, issue of

Science by researchers at the Lawrence Livermore National Laboratory and the Institute of Atmospheric Physics at the University of Arizona suggests that smoke emitted into the atmosphere from human activities may be having a significant effect in counteracting... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Per our discussion on today's SMEP call, it would be interesting to have a more in-depth discussion on Indoor Air Quality. Questions I have personally...

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Guiding questions:

Anyone using the USG EcoSmart drywall? I'm writing a short product review and am looking for some quick feedback. I'm particularly curious about reduced greenhouse gas emissions and overall cost. Thanks! Brent

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more

Thought I'd share this interesting research about something I hadn't considered as another pandemic impact - the use of video in Zoom etc calls vs. audio only. Maybe an excuse to keep your camera off some of the time?

https://www.sciencedaily.com/releases/2021/01/210114134033.htm

MAL

Hi all,

We have an institutional client who has tired of LEED and is instead putting forth EarthCraft Light Commerical as a replacement certification (they like the performance verification & lower cost that ECLC provides).  Has anyone used ECLC? It seemed an odd choice but wanted to hear from others on their experiences. The... Read more

I have a request from an Architecture firm to do a Fitwel Core and Shell certification.  I don't do that type of thing - anybody out there interested in this type of work?

Respond here or just email at me annehicksharney@gmail.com.

I wanted to share some thoughts from Brenda Stanfield about the Design for Freedom conference and the work that she is doing to fight the difficult problem of forced and child labor in construction materials.I feel like it is a step up from the LEED social justice pilot credits, which are a great start. Hopefully it helps you in your work. I am... Read more

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.