Hi everyone,

Will you be attending the Living Future 2023 conference, or do you live near the DC area?

If so, you’re invited to join us for an informal meetup!

When: Wednesday May 3, 2023, 7:30-9pm ET

Where: SmithGroup, 1700 New York Avenue, NW, Suite 100, Washington DC

If you plan on coming, please be sure to... Read more

Welcome to the quiz portion of The Urgency of Embodied Carbon and What You Can Do About It​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “embodied carbon” and explain why embodied carbon is a significant source of greenhouse gas emissions, which threaten health and safety... Read more

Hello Green Gurus,

I wanted to take a moment and introduce myself as I am new to the group. My name is Tim Pranaitis and I am the co-chair of the newly-reformed sustainability committee at Steffian Bradley Architects in Boston, MA. As a newer member of my firm, I have been tasked to re-start and grow our sustainability committee which... Read more

Friends of EPIC –

Hey, everyone. As some of you might have heard, we’ve been working for a while with Autodesk to get c.scale (the data model behind EPIC) built into Forma – Autodesk’s AI-powered planning tool. Forma is packaged within Autodesk’s AEC collection and most firms using Revit should already have access. This integration is... Read more

If you use the mindfulMATERIALS library to easily access material transparency documentation (if not, check it out!), please take 5-10 mins of your time to fill out this quick survey and help guide the future of the library.

The mindfulMATRIALS Collaborative is an industry-led initiative, visit www.mindfulmaterials.com to learn more. ... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

Hi folks, 

AIA COTE National is looking for Techincal Reviewers for the 2025 awards. Interested, or know someone who might be?  Sign up here: https://form.jotform.com/231175886103153

Thanks!

Hi Everyone.  Hope you and your families are all healthy and safe.

We are starting to figure out how we are going to implement the Contractors Commitment at my company, and we're using the opportunity to simultaneously set corporate wide and jobsite metrics and goals for sustainability tracking.

Each year we issue a sustainability... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more