Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

Carol Venolia, Publisher/Editor

A study published in the June 5, 1992, issue of

Science by researchers at the Lawrence Livermore National Laboratory and the Institute of Atmospheric Physics at the University of Arizona suggests that smoke emitted into the atmosphere from human activities may be having a significant effect in counteracting... Read more

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

The company's promotional material is the epitome of environmentally friendly packaging—like a Ben & Jerry's annual report. The article reprints sent were even bound in a jacket made from corrugated cardboard. So we were quite intrigued by the product. Syndecrete™ is a lightweight, pre-cast,... Read more

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Hello, All,

Does anyone have experience with cove.tool (https://covetool.com/)?  Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines?  It came across our radar recently, and I'm wondering if the subscription might be worth a try.

Thanks! 

Maria

Hello All,

I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content.  I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR.  From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more

Hi:

I encourage you to review and sign this letter. 

Notes from BDC follow:

Really appreciate the outpouring of support we've received so far on this letter! Various groups let us know that they would like additional time to review, so we've decided to extend the deadline from June 23 to Thursday, July 14 at 2pm.

As... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Hello SDLs,

I'm fairly new to the group, joined in November and I must confess to being a total wallflower here, having gone almost 6 months now without introducing myself. I am an Architect with Dyer Brown Associates in Boston, MA where I head up our firm's sustainability efforts, as well as devote a fair amount of time to '... Read more

Hi - some of you may have received an invite to the White House for a 3-hr session to continue the discussion on the Net Zero Emissions building that they released earlier this year. This discussion will be on embodied carbon. I have no idea who the invite went to. If I beg I may be able to go, but if there are plenty of other Architects that... Read more