Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Greetings!

Back again re: the work we're doing with City of Cambridge, in their great leadership efforts to develop EC policy/regs/incentives and reporting requirements.

Thanks to those who responded earlier about the effort it takes you to conduct WBLCA - now we're diving into it in more depth and wanting to get together a focus... Read more

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Hi All,

I'm teaching a class this semester at CU Boulder on Zero Carbon Buildings and Cities (a new class that I'm making up as I go). The hardest part, I'm finding, is locating some good materials that cover the basics of energy efficiency for non-building engineers or designers (we are energy and sustainability generalists in this... Read more

Hello Green Gurus!

Quick introduction as this is my first time posting - Louis Koehl, AIA, CPHD, Director of Sustainable Design at Handel Architects, based in NY. I recently joined the SDL Forum and met some of you at the regional summit and Greenbuild.  I'm excited to continue to connect with such an influential group! 

My... Read more

Hi SD Leaders, my firm wants to make a case for conducting LCAs on all major projects. I'm curious what your experience is - how long does it take to conduct an LCA (for the analyst's effort and other project team members who attend meetings about the LCA and use its results), and the type of LCA software you're using. 

I feel sure you'... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

I have a client seeking grant funding & they're vetting current US technology around large-scale prefabricated mass timber. My question to this group is if this currently exists anywhere in the US.

Qualifications:

10+ years experience manufacturing and installing large-scale prefabricated mass timber elements into completed... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

Has anyone heard of floating solar technology? I can't think of an application other than covering power plant retention or agricultural waste lagoons. Covering up the sun on a natural body of water and adding electrical wiring seems like a bad idea. I am curious though if others have heard of this technology and have other (unbiased) ideas... Read more

This summit was pre-approved for 10 AIA LU|HSWs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

I've been hearing a lot of talk about density becoming a thing of the past. Like with the danger of antimicrobials, it would be great to have some more in depth backup information on whether density is really a danger factor, or if other factors are more important, when we go into these conversations. Does anybody have any new or better... Read more

Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more