BuildingGreen Report

Explainer

July 1, 1992
Wet-spray Cellulose

While dry cellulose in curtain-truss cavities provides a very attractive system environmentally, there are other—more common—ways of using cellulose insulation in walls. In new construction, the most common is wet-spray installation, in which cellulose is mixed with water and (often) an acrylic binder and sprayed into... Read more

News Analysis

July 1, 1992
Green Builder Program in Austin Recognized at Rio Summit

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

Feature

Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.

July 1, 1992

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Op-Ed

Introducing the first issue of our newsletter.

July 1, 1992
Welcome to Environmental Building News

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Feature

July 1, 1992

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Feature

Susan Maxman is the first AIA president to make sustainable design a priority. 

July 1, 1992
Interview with Susan Maxman, President, AIA 20 June 1992

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

News Brief

July 1, 1992

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Forum topic

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Forum topic

You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

Quiz

Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Forum topic

Greetings to the Green Commons!

Those of you who attended Greenbuild may remember that during one of the keynotes, Ali Zaidi - White House National Climate Advisor, announced that the White House was developing a definition for "Zero Emissions Buildings" (here’s a [LINK] to a related Washington Post article). The draft language for the... Read more

Peer Network Event

Team Group

Forum topic

Thought I'd share this interesting research about something I hadn't considered as another pandemic impact - the use of video in Zoom etc calls vs. audio only. Maybe an excuse to keep your camera off some of the time?

https://www.sciencedaily.com/releases/2021/01/210114134033.htm

MAL

Forum topic

Hi folks,

As you may know, this network is part of a family of Sustainability Leader Peer Networks that BuildingGreen hosts. They each have their own private forum, and there is also a shared cross-network forum called "Green Gurus." 

Those of you have already paid in to be part of this network moving forward have automatically... Read more

Forum topic

Our guys have started talking about how the built enviroment can address infection transmission in public spaces - places like lobbies and waiting rooms, particularly in applications where people queue - theaters, airport gates, amusment parks, etc.  In the specific case of Covid-19, we know the microbe can be transmitted three ways:  fomite (... Read more

Forum topic

Hi folks,

I hope you're all doing well, despite the heat (thermal, political, social...ugh!).

We've had low turnout on the SAL monthly calls lately; it seems that these aren't a high priority for many of you. That's not necessarily a problem, if you're finding value in being in the network for other reasons, that's fine.

We... Read more

Campus-wide Group

Forum topic

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more