Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Hi folks,

I’m excited to be welcoming Meredith Elbaum and Nellie Reid into this forum! Meredith and Nellie were the duo that originally conceived of the Sustainable Design Leaders network back in 2008, and led the effort (with BuildingGreen’s support) through it’s early years. 

They later left their SDL roles, so they haven’t been... Read more

Within the confines of the BuildingGreen safe space, I wanted to share the Forced Labor in the Building Material Supply Chain Mitigation Framework I shared at the 3/1 First Friday Fika. The intent is for this document to become public, but we are working through some permissions and final editing logistics. The project was collaborative... Read more

On Thursday, September 27 at 2PM Eastern Time you can join the first BuildingGreen Communities webinar where we will share key takeaways from the 11th annual Summer Sustainable Design Leaders Summit (@ the Garrison Institute in upstate New York). Our new webinar format using Zoom will allow for interactive questions and comments throughout. If... Read more

Has anyone used the new 3M Smog-Eating Granules on a roof before? Malarkey and Soprema are offering this as an option for their roof shingles. Seems like a great technology for urban areas, but I'd be curious to see if anyone here has actually successfully specified and installed it.

https://www.3m.com/3M/en_US/roofing-granules-us/... Read more

Dear All!

I recently met a passionate new hire at an architecture firm in NYC.  Her firm is reluctant to taking meaningful steps towards increasing sustainable impacts of their projects.  (Their work is in market rate of all types.)  This new hire is frustrated with the lack of sustainable adoption and understanding.

What would... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

Are you a design or building professional who wants to learn more about sustainability—such as how to do energy modeling, improve the building envelope, or use renewables on a project? Now more than ever, it's time to join the sustainable... Read more

Has anyone come across any (embodied) carbon emissions calculator for water?  Perhaps per region/state?  

Thanks in advance!

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Hello Everyone!

We’re beginning to plan events for the rest of 2021, which means we need your input to make sure we are putting together structures and content that are most valuable for you.

Please take a moment to take this brief survey DUE June 25th! You will find details on our current thinking for these events within the... Read more

Want to make sure those in Portland are aware of a couple of LF18 Ramp-Up Events happening on April 10th. 

Introduction to the Living Building Challenge (presented by Kathleen Smith)
https://living-future.org/events/introduction-to-the-living-building-challenge/

Incentivizing Living Buildings in Portland 
https://... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

Hi folks,

Our next private webinar is coming right up:

Fusion of Design + Performance: How Payette Was Recognized As AIA Firm of the Year

Tuesday, February 12, 1:00 pm EST

Payette is the first AIA Firm Award recipient to have been nominated jointly by the Committee on Design and Committee on the Environment. Z Smith... Read more