I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

Hello Sustainable MEP Leaders!

Over the weekend BuildingGreen received an inquiry about connecting with this peer network regarding a project. Please review David Cohan's email below to see if it is something of interest for this group.

We would invite you to reach out directly to David Cohan and let us here at BuildingGreen know... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Hi Shane and Dennis,

What return address should we use for BIT User forum notification emails?  Ben suggests something like no-reply@bit-user.org but whatever you like is fine.

Once you decide, please let us know who controls the domain name (e.g. bit-user.org or bitbuilding.org).  Ben will send them instructions for editing the... Read more

Hi all. Not to poach from your awesome firms, but FXCollaborative is hiring a Sustainable Design Specialist. Here is the job posting:

Sustainable Design Specialist - FXCollaborative, Brooklyn, NY, US

Please send any great candidates my way!

Thanks,

Dan

Hi everyone,

Thanks so much again to everyone who attended the Spring 2024 SCL Summit. The report is now available and is a public document that can be shared.

Please feel free to email me with any questions. Enjoy!

Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

Welcome to the quiz portion of Protect Your Spec: 14 Strategies. 

Learning Objectives
Upon completing this course, participants will be able to:


Identify ways to ensure continuity between the environmentally preferable materials in a project specification, and the less-than-ideal materials that end up used in the final... Read more

Welcome to the quiz portion of Wood: What’s Good?

Learning Objectives
Upon completing this course, participants will be able to:


Hi Green Commons,

It’s been eerily quiet here since Tuesday night. I’ve been quiet mostly because I just didn’t know what to say. The election results are certainly a blow to pretty much everything we’ve been working for. There is so much we don’t know about things might play out, but I’m feeling a range of emotions ranging from... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

HI MEP Leaders,

Related to our thread about equipment needed for decarbonization, I have a question about what new or improved equipment is already available now that you're excited about.

Every year we at BuildingGreen publish (and present at Greenbuild) a listing of the Top-10 new and exciting products. Our focus this year is on... Read more

Were we given any warning that LEED Online and USGBC.org would be down for a week?  

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more