THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Should housing be affordable? Or should it be sustainably designed, built, and operated?

When you put it like that, the question sounds absurd.

But the idea—usually unspoken—that sustainability wastes precious time and resources is painfully common in the... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Meet the winners:

2024
2023
2022
2021

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Hello SCL, I was asked by a friend at ILFI to share this invite specifically to the SCL group to join their Living Future 20 conference which is in a couple weeks and will be all online.  There is also an invite for a construction-only focused ILFI discussion May 14th in the message as well.  Hope everyone is doing alright out there.  Talk soon... Read more

I'm just wondering if anyone is using GBCI's Better Materials site as their go-to source for transparency and healthy materials.  Having all the search engines on one platform is great in theory, and I keep hoping that it will be the one-stop site/resource that I can get all our designers to use.  Unless I'm missing something though, it still... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

All,

I think there may be more than a few people interested in an article I co-authored titled Comparative whole building life cycle assessment of renovation and new construction. It is now available in the journal Building and Environment. Fortunately we have a link that gets you past the paywall that is good for 50 days. If you have... Read more

I understand the AIA 2030 team is hoping for as many firms (and projects) to submit some form of LCA data in the new DDx website this week, in order to learn how the industry is tracking embodied carbon.  We have four projects that dabbled with Tally last year, which we'd like to report this week.

Has anyone run into a hurdle where you... Read more

Hello SDLs!

Here are presentations from last week's 2018 SDL Summer Summit Show & Tell Presentations.

Best,

RoseAnn

Is anyone planning on attending the WELL Conference in Scottsdale in March?  I'm trying to figure out if it's worth attending or not?

test

Hans “Grumpy” Grimm