Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

We have a client for whom we are designing a very high performance manufacturing facility, and they want to communicate their building's performance both dynamically and in real-time within their lobby for guests and staff.

We would like to mine the wisdom of this group to see what recommendations we can muster regarding high quality... Read more

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

The Project StaSIO competition is in full swing, and its time to rate the submissions that made it to the public voting round!  Fancy yourself a connoisseur of simulation graphics and have a spare 5-10 minutes this Friday?  Take a browse through the gallery and rate the 10 graphics and 4 case studies that made it to the final round! Winners... Read more

Hello fellow Green Gurus! 

I am very thrilled to share this news. "Global architecture, design and planning firm HLW is pleased to announce BEYOND, a cutting-edge sustainability consultancy working across the built environment to drive higher standards for sustainability, resilience, and building performance."

Please click here to... Read more

I'm happy to let you know that Barbra Batshalom has joined the Green Gurus forum!

Many of you already know her from her Sustainable Performance Institute work, and from the great workshop she and her husband Moshe Cohen led before our Boston Summit, but she is also serving a consulting SD Leader for several firms. I'll let her say more... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

This summit was pre-approved for  6 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your information is... Read more

Welcome to the quiz portion of Resilient Design—Smarter Building for a Turbulent Future.

Learning Objectives
Upon completing this course, participants will be able to:


1. List three motivators for resilient design and at least three actions that address each motivator.
2. Explain why climate change isn't our... Read more

Hello everyone!

The Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the workshop and might be... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

My firm is mobilizing for a year of carbon awareness and reduction that goes beyond the energy consumption of our designs. We are looking to hire a full time person to take on LCA tracking for our current projects. Ideally it is a climate crisis super-hero of sorts who could also look at our design process and help develop multi-faceted... Read more

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

Curious on stories when IAQ testing for LEED or WELL didn't come back with "all clear, everything's good" results we all hope for. 

I have a project right now where we are tracking down suspicious sources and look forward to telling the full story when it's done being written. 

Thought maybe this would be a good safe space to talk... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more