BuildingGreen Report

Author

Alena Jumplot

Forum topic

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

Forum topic

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

Forum topic

There is a ton of stuff being posted about this, so this is definitely an area where it's nice to have had someone going through it and selecting the best. Thanks for doing that, Jen!

- These tips from 350.org have a great focus on connecting people and using different techniques. Their sample retreat shows how some of it might look in... Read more

Forum topic

Hi! I hope that others who were at Islandwood found it as fulfilling as I did. (Janice and I spent the weekend exploring the island on bicycles--we're just getting on the ferry to Seattle now. It was a great little vacation!)

Let's use this thread to share notes and documents from the Summit. Please post your highlights here, or send... Read more

Forum topic

asdfasdf

Forum topic

Hi,

Has anyone used a sustainable product that complies with the EQc Low-Emitting Materials requirement that is a general construction adhesive similar to Liquid Nails? I've checked the Mindful Materials website and can't find anything. I found Red Devil General Prupose Construction Adhesive on UL Spot, but have never used it before. Any... Read more

Forum topic

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Quiz

Welcome to the quiz portion of Existing Buildings Are Architecture’s Future!

Learning Objectives
Upon completing this course, participants will be able to:


Explain why existing buildings are typically environmentally preferable to new construction. List six things an assessment of building reuse should include. Describe four... Read more

Quiz

Welcome to the quiz portion of The Great Eight: High-Impact Material Choices for Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Specify green building materials in product categories that truly make a difference for human health, the environment, or both.
2. Conduct a... Read more

Forum topic

Hello Everyone,

Here is the information and invitation to complete the SCL Demographics Survey! If you have multiple company colleagues on this forum (you can check in the group list here click "Group members" tab), please coordinate to have only one of you submit survey responses.

If you would you like to gather your answers... Read more

Product Guide

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

are certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Forum topic

Hi MEP Leaders!

Here's a reminder that our monthly meeting is coming right up--today at 2:00 pm ET.

There is a lot to talk about: James has put together a starting point for our "how to make the best use of your engineer" guide. And Summit plans...

You can view the agenda here.

All members of the SMEPL network are... Read more

Forum topic

On LEEDuser we divide checklists into multiple project phases. Specifically:

Before the performance period Construction Construction documents Design development During the performance period Operations & maintenance Pre-design Schematic design

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Author

Forum topic

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Forum topic

The results from the "CogFx" study are compelling, showing that people in environments with low VOCs and low ambient CO2 levels score higher on tests of cognitive function.  Specifically, they show that providing 40cfm of outdoor air per (actual live) occupant results in significantly higher scores than even the "Enhanced Ventilation" scheme... Read more

Forum topic

Hi all,

I've been working on a LEED project in California for months and our energy modeler wants to use the LI 10480 Title 24 2019 pipeline to demonstrate compliance under LEEDv4. Only problem is, I've never done it that way before, and our modeler and I are consistently speaking in different languages. Anyone done a project under this... Read more

Forum topic

Hi SDLs,

Do you have design experience or a unique perspective on trying to include ungendered multiuser restrooms in AEC projects? We want to hear from you.

To prepare for a co-creative workshop as a part of the Environmental Design Research Association's 53rd Annual Conference, "Health in All Places," B. Sanborn, Nicole DeNamur... Read more