The ReUse Map created through the Material Flows Working Group is live and got some great traction at Greenbuild (Thank you Nadav and Barbara!).

To keep the map relevant and updated, we'll be looking at how to fund the maintenance of the map, the best ways to get the word out and looking at writing a white paper. If you want to be part... Read more

Quiz body

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Standard spray polyurethane foam (SPF) insulation is made using blowing agents with extremely high global warming potential (GWP), which can cancel out much of the potential energy savings from use over its life... Read more

Hi SDLers! I hope early fall is finding you well.

There is a current opportunity to make a difference in the campaign to reduce use of toxic flame retardants.

Arlene Blum and the Green Science Policy Institute, whom many of you know, are currently organizing a campaign of support for the CA State Fire Marshal's proposal to allow... Read more

Greetings,

I'm looking for recommendations from this esteemed group for 3rd-party vendors/verifiers of GHG emissions to support our CSR initiatives. We currently have a provider, but our company has grown to the point to where we need to transition from "analaog" reporting (location by location) to a higher level of service offering (... Read more

Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

As BuildingGreen’s Content & Data Wrangler, Fran is a spreadsheet and content-management wiz who:

Fran also compiles data submissions... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

Hey everyone, HNY!

I'm looking for help in vetting the sustainability cred of uPVC polymer window systems, specifically as an altnerative to traditional PVC vinyl frames. We recenly had a presentation from Intus Windows, who claim that their uPVC frame systems have a low-toxicity profile and excels in performance for thermal efficiency,... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

I hope this post finds you all well. Some news to share.  I have recently made a decision to leave Thornton Tomasetti with an eye toward finding another opportunity to use my 30+ years of green building experience, education, and advocacy to have an even larger impact on climate change. I am going to move slowly to ensure my next chapter is the... Read more

Hello Everyone,

On September 9th a regional cross-network group gathered for the first in-person Peer Networks event since the beginning of the pandemic. All Peer Networks were represented at this Boston Region Mini-Summit! With this first one in the books, BuildingGreen is hopeful for paving the way to future regional events across the... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Here's the Core Purpose for this group that came out of the Inaugural Summit.

We're off and running!

Hi there SD Leaders,

We're running an LCA on one of our projects that's about to start construction that has had serious embodied carbon goals and I got a result that really surprised me. I haven't been able to find any obvious/glaring issues with the work, but these results are strange enough that I'm not feeling confident. I'm hoping... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Conventional excavation practices can harm ecosystems, while improper foundation and slab drainage can allow water to build up and compromise the structure and integrity of the building.

BuildingGreen-... Read more