This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Has anyone found any options to recycle safety vests, or discovered an upcycling option for them?  We are about to replace all of our vests company-wide and will have thousands that we don't want in the waste stream and we don't want to be reused as safety vests.  Any thoughts or ideas would be great!

Thanks and I hope everyone is... Read more

Hi All,

Jacob Knowles from BR+A reached out with a request and I’m passing it on to you all.  Jacob’s contact info is at the bottom of this so you can respond to him directly or respond here and I’ll forward it on:

We are working on assembling examples of large wet lab buildings that employ strategies to greatly reduce fossil... Read more

Gather with the Changemakers in Sustainable Construction

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll set the agenda for changes to LEED v5, strategize on... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Hi all, has anyone come across a comprehensive (and recent) study looking at how long buildings actually last (beyond Stewart Brand)? I know of plenty that look at the benefits of reuse, but none that look at existing building stock and how much has been reused vs. demolished. 

As we start looking at embodied carbon metrics, I can't help... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Meet the winners:

2024
2023
2022
2021

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Hi SDLers: ESG Investing is mushrooming which is a very good thing. AIA National, for example, just switched over to 100% ESG investments. With it, there seems to be a growing number of "ESG-lite" options. I'm wondering if anyone among this informed group has recommendations on how to determine a quality investment approach. I'd appreciate any... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

I have reached out to the AIA staff members that I work with on the Energy Leadership Group (AIA ELG) to see about getting into the cycle of updating these standard documents.  Another member of the ELG, architect Kjell Anderson of LMN in Seattle, is interested in working with us on this effort, as he has started including Standard 209 language... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

Hi Everyone, 

Our Vancouver team is looking for some innovative, high performance  building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more