I have a request from an Architecture firm to do a Fitwel Core and Shell certification.  I don't do that type of thing - anybody out there interested in this type of work?

Respond here or just email at me annehicksharney@gmail.com.

Lisa Richmond

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hi all,

We have an institutional client who has tired of LEED and is instead putting forth EarthCraft Light Commerical as a replacement certification (they like the performance verification & lower cost that ECLC provides).  Has anyone used ECLC? It seemed an odd choice but wanted to hear from others on their experiences. The... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

I'm working on the Best Practice pages, and I want to verify the role of "BITuser experts" (analogous to LEEDuser experts, as shown on this credit page). My questions:

Note that the role of the expert,... Read more

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

Hello, All!

Looking for some quick insight from the braintrust into how to best approach project goal-setting.

We’ve been taking a critical look at goal-setting practices to better understand what drives the gap between projects that meet ambitious high-performance targets and those that don’t. Recognizing that goal setting is a... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Hi All,

As you know from the SCL Summit last year, I have been organizing a task group to create a draft of our SCL Contractor Commitment. We have come up with a short Tiered commitment draft as well as some best practices and challenges that led us to the commitment. I encourage everyone to take a look at the draft and please send any... Read more

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

Hello Everyone,

LHB continues our search for a Regenerative Design Specialist to oversee our multi-discipline firm's goal to reach regenerative design.  This is a leadership position with unique opportunities to influence architecture and engineering across many market sectors. 

We understand it's been an exhausting year and that... Read more

What better way to follow up the magic of a live presentation from Peter Yost than with 15 free days of BuildingGreen Premium?