Ground- and water-source heat pumps move refrigerant or water through the ground or a body of water for use as a heat source (for indoor heating) or heat sink (for indoor cooling).

BuildingGreen-Approved Heat Pumps

BuildingGreen approves:

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Hi there SCLers,

Hope everyone is safe and healthy. I am posting on behalf of the Steeering Committee to let you know that the Committee has now adopted a Core Purpose Statement for the SCL Group. Please give it a quick read; we will likely sit with this and spend some time internalizing what it means at the upcoming Summit. 

The... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

Does anyone know where one can locate weather files (EPW) that has predicted future data for climate change?

Thanks in advance.

Hello Green Gurus,

Here is the information for our second Peer Networks Webinar this month, coming up next week: Better Products = Better Buildings (Low Carbon Specs). We hope you can join us!

Register HERE.

Better Products = Better Buildings (Low Carbon Specs)
Thursday, May 19, 2022
1 - 2pm ET (10 - 11am PT)... Read more

Welcome to the quiz portion of Toxic Chemicals in Buildings: How to Find and Avoid the Worst Offenders (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how key health hazards and opportunities for healthier choices vary by product category.
2. List... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.

Whether you’re attending Greenbuild 2024 or live near the Philadelphia area, join us for BuildingGreen’s annual Greenbuild Show & Tell! The event will take place from 6:30-9:00 pm on Tuesday, November 12th at Jacobs, with the first hour for socializing and the 5-minute presentations starting at 7:30pm. Light refreshments and beverages will... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

Hi Gurus,

It seems odd to think about leases now, during a time when most business are giving up leases or reducing their footprints, but there are still leases going on! Please share this link to any clients of yours who might be interested and sign up yourself if you want to advocate to your clients to consider these leases!

... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more