Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

An induction range capable of replacing a standard gas range offers the potential of significantly reducing the energy required for ventilation in a commercial kitchen and improves IAQ at home.

We look for commercial-scale as well as residential induction cooktops and ranges designed to reduce indoor... Read more

Welcome to the quiz portion of Natural Ventilation: The Nine Biggest Obstacles and How Project Teams Are Beating Them

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the primary reasons to design a building for natural ventilation.
2. Understand how cost, comfort... Read more

Dear SDL,

After almost 12 years at Sasaki, I have finally decided to leave for a path slightly-less-traveled. My own development project in Boston (passive house, ZNE condos) is in construction and I will be focusing my attention on that over the course of this year, and then hoping to continue doing similar integrated... Read more

Hello Fellow Green Guru Members:  I am pleased to be a new member of the Sustainable Community Design Leaders (SCDL) forum, and look forward to learning and contributing here.  Also, in case you missed it, this week there were two important steps forward towards an eventual standardized Environmental-Social-Governance (ESG) reporting system... Read more

We all know the climates are shifting, and the ASHRAE standard that gets invoked for energy codes is shifting along with them--though not in perfect sync.  Louisiana is leaping from ASHRAE 90.1-2007 energy code to 2021 IECC (boom!).  The 2021 IECC as published uses relatively old climate maps; for Louisiana, at least, the same as the 90.1-2007... Read more

We are working on a large, commercial, LEED project in the Wash DC area, and the Construction Management firm needs LEED administrative/documentation assistance on their end of the process.  The construction is underway but the CM lacks the staff. 

Can anyone suggest a LEED consultant in the DC area that can work for the CM -- managing... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

Hello,

We have a mass timber purpose-built rental project specifying flooring at the moment and are trying to find a healthy flooring option while managing acoustics with CLT floorslabs. We don't typically spec vinyl flooring due to the health concerns around PVC, but the project is budget-conscious, and our flooring supplier is... Read more

Hi everyone,

Join us for the webinar, "IRA Funding with a Tax Expert Part 2: Updates and  Clarifications" on Tuesday April 2nd at 3pm ET!

Register here and please feel free to invite anyone from your firms to join.

The great presenter from Energy Tax Savers, Jacob Goldman, is returning for a follow-up session for our... Read more

Hi all,

I'm trying to figure out how to use this CLF MEP calculator tool that is downloadable from the CLF website. Please see screenshot attached - does anybody know what they are asking for as an input?

"Custom quantities input: The user can enter custom quantities on this tab and produce numerical results. For data input fill '... Read more

Greenbuild bound colleagues-

I unfortunately cannot join for the summit Tuesday but should be flying in early enough to potentially join the group for dinner. Are there any plans brewing that I might join?!

Let me know? Thanks.

Katie Rothenberg

Vice President, Sustainability & Innovatio 

HITT Contracting... Read more

I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.

BuildingGreen-Approved Green Roofs

BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:

Welcome to the quiz portion of What’s New in Multi-Attribute Environmental Certifications.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe several styles of multi-attribute certification.
2. List a benefit and a downside to both point-based certification programs and... Read more

You can download the guide here:
https://www.collaborativedesign.org/

And I would ask that any/all of you who find this interesting and useful to please share with your networks. We want it to get distributed far and wide!

- Clark

As Editorial Director for BuildingGreen, Tristan Roberts brings a deep commitment to environmental stewardship, a broad knowledge about sustainable design, deep understanding of green building products, and a mastery of all things LEED. A longtime contributor of in-depth feature articles in Environmental Building News and regular reporting on... Read more