On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Amanda is BuildingGreen's Peer Networks Manager, working behind the scenes to support the Peer Networks team and members. They are passionate about sustainable design and love helping people find tangible ways to help the planet.

Prior to joining BuildingGreen in 2023, Amanda was a campaigns coordinator at a food justice... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Hi all,

The USGBC Pacific Region is launching a new award this year that recognizes projects that have aspires to promote health of occupants and surrounding communities.  In true USGBC style, this award has not been properly publicized, so they are still looking for submissions.  I believe the deadline will be extended to June 7.  I... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

Following the summer SDL summit - we formed a spinoff user group called "Carbon Sync" to discuss Life Cycle and Carbon Assessment tools like Tally and Athena.  We've had three successful calls with folks sharing a couple 5-minute presentations about various studies and explorations.  We have a mix of experience levels - but are collaborating... Read more

Hi Everyone!  About ten days ago, Megan Zack posted a note announcing her new role as Chief Sustainability Officer at Wight & Company. (Yay!)  I'm so delighted that she will be stepping into this leadership role at Wight to shepard the firm in the next chapter of their journey in sustainability. 

I wanted to take a moment to say... Read more

Hey all - sorry I won't be able to join our call today. I had a client request an emergency meeting today (boo) because corporate mandated that they eliminate fossil fuel use from all their buildings (yay!) by 2025 and they've got a project underway that needs to pivot quickly. 

Had I been able to join, I wanted to share this in case... Read more

Team,

Many of you saw this from BlackRock.

https://www.blackrock.com/corporate/investor-relations/larry-fink-ceo-letter

SOM, starting with London office, is drafting a letter to our MEP consultants, demanding and holding them accountable for climate change as a preference on consultants selection.

Best,
LL 

Dear Colleagues:

If you are short on time, here is the executive summary:

Time to make healthy trouble and sign a petition today to the WHO to urge them to recommend the implementation of best practice healthy air guidelines in light of the recent studies showing a direct link between the spread of COVID-19 through aerosol... Read more

Hi everyone!

My awesome colleague, Paula Melton, is doing a short talk for USGC about mass timber and wants to know if there are SCLers in the group that can share their experience. In particular: 

"I’m wondering particularly about how supply-chain and cost issues are affecting availability and decision-making, and what the onsite... Read more

Hi folks,

I hope you've seen the plug to sign onto the letter that's generated a flurry of messages on Green Gurus--I also emailed it out directly to everyone. We've got lots of architects on board, and a handful of engineers, but I think we just have one contractor so far (Thanks Theresa!)--it would be really awesome to have more.