Forum topic
Has anyone used a commercial heat pump water heater for a large protect? I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.
Forum topic
Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.
Product Guide
Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.
BuildingGreen-Approved Roofing
Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.
Energy Star requires initial reflectance of 0.65 for low slopes... Read more
Forum topic
On LEEDuser we divide checklists into multiple project phases. Specifically:
Before the performance period Construction Construction documents Design development During the performance period Operations & maintenance Pre-design Schematic designHow many of these phases are relevant for BIT best practices?
Note that we also... Read more
Forum topic
Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me: Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope. The GWP from embodied carbon will... Read more
Quiz
Welcome to the quiz portion of Whole-Building Life Cycle Analysis: Promises and Pitfalls.
Learning Objectives
Upon completing this course, participants will be able to:
1. Define whole-building life-cycle assessment.
2. Explain what whole-building life-cycle assessment can and can't do so you can work within... Read more
Forum topic
Hello SDLs!
Here is the 2018 SDL Summer Summit Report, ENJOY!
In a couple of weeks we will share this report with the broader Green Gurus group.
We are also working on setting up a webinar to present the 2018 SDL Summer Summit Report and discuss the Summit!
All the best,
RoseAnn
Basic page
BuildingGreen Approved, like its predecessor, GreenSpec, is an independent product evaluation service for BuildingGreen members. We offer an unbiased look at products: BuildingGreen does not accept any manufacturer fees for our evaluations. Here’s a quick tour of the platform and how to use it.
Who can access BuildingGreen Approved... Read moreForum topic
I'm working with a project team that is looking into bird control options to prevent nesting/roosting/pooping on the scrim that is designed to scrim their building's facade. They are looking at electrified tape, repellents, laser systems, etc -- Options that don't dramatically impact the building design. The products they're looking at claim... Read more
Forum topic
Hi All, I was initially reluctant to share this, but I've seen similar posts and I think it's in line with our mission and interests so I'll go ahead with it.
Tomorrow 12/9 at 1 PM EST I'm moderating a panel of industry leaders in public health (as it pertains to buildings), construction finance, and project development to review the... Read more
Forum topic
Hello everyone,
Over the past couple of years the Climate Smart Wood Group has met monthly to discuss all things related to the use of timber in building design and construction. From forestry practices, to supply chain and sourcing information, to design experiences and examples, the group has operated as an open forum for advancing... Read more
Forum topic
Hi all,
Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue. Should... Read more
Forum topic
Hi All,
Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.
Thanks for any and all experiences!
Misha
Forum topic
Hi all,
As you know, the Carbon Leadership Forum has been busy in recent years growing the tent of discipline-based commitments for reducing embodied carbon. SE 2050 and MEP 2040 provide the platform and commitment for structural and MEP respectively, and there is now interest brewing for an additional commitment in support of civil... Read more
Forum topic
Hi all,
Internally in our organization, we seem to have plenty of horizontal (infrastructure) resiliency expertise, but I'm finding the vertical resources to be lacking. I'm hoping to build a collection of beginner- to intermediate-level resources to help guide practice/design standards for our reference. Any pointers on good info... Read more