Alena Jumplot

We are hiring! Please share with any potential talented and passionate candidates.

https://archinect.com/jobs/entry/150052970/sustainable-design-specialist

ps. And, yes we recently rebranded for our 40th anniversary for those who may be confused :) 

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Should the Best Practice names always be accompanied by their number? See the attached screenshots, all taken from the main forum page:

Hi SDL'ers, as promised I am sending information about how to support getting flame retardants out of foam insulation. I am attaching a draft letter to Foam Manufacturers, an intro to that letter giving some background and a list of From manufacturers.   Thanks, please contact if you have any questions.   Larry Strain, Siegel & Strain... Read more

First, special shout out to Carolyn Day from Perkins Eastman for getting permission to use their Pro-zoom account for this Greenbuild wrap-up social session, because...frankly...Greenbuild just wasn't the same without all of you.

So, while we can't be together in person, that doesn't mean we are stuck by ourselves. Grab a refreshment and... Read more

Welcome to the quiz portion of Reexamining Priorities in Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define green building priorities from a few different angles (separating process priorities from outcome priorities).
2. Differentiate those priorities... Read more

As BuildingGreen’s Products & Materials Specialist, Brent excels at deep, unbiased, and nuanced technical research on the health and environmental impacts of green building products and materials. Some areas of focus include:

product and material constituents, including their risks

product certifications

third-... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Welcome to the quiz portion of No More Red Lines: Undoing Our Legacy of Urban Segregation.

Learning Objectives
Upon completing this course, participants will be able to:

Hi All, 

Not sure if this is the right location for this (as I'm a new member) but we're Planning the upcoming Water Conservation Showcase in Northern CA. Some details below

The Water Conservation Showcase brings together water, energy, and green building professionals to amplify and discuss innovative water management solutions... Read more

Hello Green Gurus.

I've been looking into EPDs lately and ran across a few companies with Product Envionmental Profiles (PEPs) which they say are also known as EPDs. Does anyone have any experience with PEPs or know if they actually are EPDs? They reference ISO standards 14040 and 14044 in the writing and ISO 14025 in the list of... Read more

Welcome to the quiz portion of Driving to Green Buildings: The Transportation Energy Intensity of Buildings​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “transportation energy intensity” as it relates to buildings and understand its impacts on the environment, human health, and... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more

Hi folks,

We’re working on the agenda for what’s shaping up to be a really awesome Summer Summit at a great new venue in Massachusetts. There is an awesome group already registered, and we’d like to fill the remaining slots soon so that we can develop the agenda with your input.

If you’ve been planning to register, please do it... Read more