Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

As part of the Philadelphia AIA COTE, we have been proposing implementing sustainability in some fashion into the design awards with our chapter's design committee.  I know that many of you have been down this road before, and wanted to get your feedback at a high level about what your local COTE is doing.  Anyone who's interested, can you... Read more

Hi folks,

On behalf of ILFI, I'm sharing a notice that the early registration deadline for the Living Product Expo in Pittsburgh is tomorrow! This is a great event for anyone interested in a deep dive into materials transparency, hazard avoidance, low-carbon products, overall innovation, and the Living Product Challenge. There will also... Read more

We are excited to open registration for the Sustainable Design Leaders Winter Summit 2020! This year’s Summit will take place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL. The Summit agenda will be shaped by the collective group feedback given in the upcoming pre-summit survey. The Summit begins Wednesday evening (usually 5pm) with a... Read more

Hi SD Leaders: I'm writing to get your help identifying any experts or projects where all-electric HVAC solutions are being implemented in a large new build healthcare/patient care setting. The client has raised concerns about the reliability of an electric re-heat system and its ability to promptly respond to temperature controls. They also... Read more

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings; 
2. Explain why certain materials make more sense than... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

Welcome to the quiz portion of Retrocommissioning: Big Savings for Big Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the term retrocommissioning.
2. Explain how whole-systems RCx differs from energy-focused RCx.
3. Describe several examples of how... Read more

Hello Friends!
BuildingEase's newest module is live! Its power will be in YOUR use of it! Reduce sending C&D to landfill NOW!

(the first item coming next week, new but unused Kingspan panels in Ohio!)

The BE-Xchange is a free space supporting circularity by giving everyone a place to:

- post materials left over on... Read more

Hello Sustainable Design Leaders,

I am thrilled to be joining such an esteemed collective of driven thinkers and doers. I look forward to meeting some new faces and reconnecting with some familiar ones in an effort to advance sustainable design in the built environment.

Thanks,

Jonce

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

I came across these open roles recently on Gensler's career page. Sharing them here if there is any interest in this group. As I understand it, though the roles listed are in NYC and NJ, they would be OK if the person reported to one of the following offices: NYC, Morristown, Boston or Toronto.

Sustainability Specialist – NJ: https://... Read more

Greetings,

I'm looking for recommendations from this esteemed group for 3rd-party vendors/verifiers of GHG emissions to support our CSR initiatives. We currently have a provider, but our company has grown to the point to where we need to transition from "analaog" reporting (location by location) to a higher level of service offering (... Read more