Carol Venolia, Publisher/Editor

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.

Hi all - passing on this request on behalf of Alan Scott. He is looking specifically for someone from the Gulf Coast region to round out the panel:

I am putting together a panel for a virtual session during Design Museum Week in April (Thursday, April 28). The description below outlines the conversation I am hoping to curate. I am... Read more

Welcome to the quiz portion of What Makes the Building Envelope Green? BuildingGreen’s Guide to Thermal & Moisture Protection Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe attributes of the greenest building envelope products.
2. Explain how to... Read more

Hi Fellow SD Leaders: This webinar from the AIA and the Building Resilience Coalition looks highly relevant and with some great speakers. It's free and open to all (I think...not sure how AIAU works for non-members.)

Free climate change risk webinar 10/23

Join members of 52 organizations of the Resilience Building Coalition for... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Hi all! I'm very excited to report that we have interest from a developer client in tracking embodied carbon through construction. We have issued construction documents and the construction managment team is begining the process to establish the GMP.

We're looking to use EC3, and/ or ZGF's LCA analysis tool for concrete to look at how we... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

The deadline for submitting presentations is coming up. This year ASHRAE is hosting a joint conference with Simbuild. We are just about to send out an extension announcement (It is now Feb 9th) , so there is still time to get an abstract for a presentation. 

Possible ideas for topics: 

Daylight - new metrics and... Read more

Hi all,

Passing on a message from Julia Siple at AIA who is conducting a series of focus groups related to the AIA 2030 Commitment's DDx platform. You may have already received this from other channels but I thought I'd post here as well in case it got missed. They are looking for more participants in the morning and lunchtime (lunch... Read more