A study published in the June 5, 1992, issue of

Science by researchers at the Lawrence Livermore National Laboratory and the Institute of Atmospheric Physics at the University of Arizona suggests that smoke emitted into the atmosphere from human activities may be having a significant effect in counteracting... Read more

Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Hello Green Gurus,

Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.

This event is connected with the Summit-... Read more

Hi all,

We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

We've gotten some requests recently, so it must be time to update our salary survey. For those didn't participate in the past, we last did one in 2015, and collected some really interesting data about compensation for SDLeaders.

Our first step in getting this started is to recruit a few volunteers who are interested enough in the data we... Read more

Churn and renovations can disrupt occupants, release or introduce indoor pollutants, and increase the embodied footprint of a building.

BuildingGreen-Approved Partitions

Movable partition systems allow spaces to be easily reconfigured, reducing costs and environmental impact. BuildingGreen approves partitions and panels that have... Read more

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks