BuildingGreen Report

News Brief

July 1, 1992

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Product Review

July 1, 1992
CoverAge

Update: (September 26, 2006)

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

CoverAge is a tacky name for a great product that all remodelers should know about. It is a paintable, textured wallpaper that’s made entirely of recycled paper (at... Read more

News Analysis

July 1, 1992
Logging and the Spotted Owl

The recent ruling to allow logging on several thousand acres of old-growth forest in western Oregon was portrayed in the national media as a blow to environmentalists, but the action may not prove so damaging in the end. While the ruling permits logging on 13 of the 44 sites that were under consideration by the so-... Read more

News Analysis

July 1, 1992
A Twist on Global Warming

A study published in the June 5, 1992, issue of

Science by researchers at the Lawrence Livermore National Laboratory and the Institute of Atmospheric Physics at the University of Arizona suggests that smoke emitted into the atmosphere from human activities may be having a significant effect in counteracting... Read more

Feature

Susan Maxman is the first AIA president to make sustainable design a priority. 

July 1, 1992
Interview with Susan Maxman, President, AIA 20 June 1992

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Feature

July 1, 1992

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

News Brief

July 1, 1992

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Feature

Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.

July 1, 1992

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Op-Ed

Introducing the first issue of our newsletter.

July 1, 1992
Welcome to Environmental Building News

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Forum topic

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

Forum topic

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Basic page

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more

Product Guide

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Forum topic

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Adapting the Construction Process for Passive House. We hope you will join us!

Register HERE.

Adapting the Construction Process for Passive House
Wednesday, April 28th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description
... Read more

Forum topic

Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.

I'm writing to pass along a... Read more

Forum topic

Hello, All!

Looking for some quick insight from the braintrust into how to best approach project goal-setting.

We’ve been taking a critical look at goal-setting practices to better understand what drives the gap between projects that meet ambitious high-performance targets and those that don’t. Recognizing that goal setting is a... Read more

Forum topic

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more