Hi All, wanted to share this webinar below :
The AIA 2030 Commitment and the Design Data Exchange (DDx) have transformed the way architecture firms collect project data on energy and carbon metrics, but it has never been a good place to visually understand these metrics. Architects tend to be visual people and have an intuitive... Read more

Many of today’s surface coatings are either too toxic or lack durability and require too much maintenance to be viable choices for commercial or heavy residential use.

BuildingGreen-Approved Coatings

Products approved by BuildingGreen meet California’s South Coast Air Quality Management District’s strict VOC limits. They also:... Read more

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Welcome to the quiz portion of Better Window Decisions: Mastering the Performance and Cost Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the energy metrics that inform how windows affect energy loads
2. Describe ways to avoid air leakage and condensation... Read more

Hello Green Gurus!

Here are the details for an upcoming Peer Networks webinar, Strategies for Streamlining Sustainable Materials.
Save the date! The registration link will be posted shortly.

Strategies for Streamlining Sustainable Materials
September 24th, 2020
2pm - 3pm ET (11am - Noon PT)

This session... Read more

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

For those of you who have attended the event above, I think you will agree this has been a high quality event.  But DFC is changing the forum this year. Instead of holding an annual event in September, this year they are holding 4 half day events around the country.  Attendance will be limited to 40 people and it is focused on sustainability... Read more

Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Curious if folks know of any resources on hempcrete, specific to durability.  We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more

SCL group,

I have aquaintances at a new startup called Dumptd that is launching a platform to make it easier to order waste solutions online while providing tracking and reporting options. They are looking for beta test projects. If you are interested, contact Clayton (below).

Thanks,

Scott

Dumptd is an early stage... Read more

I'm looking to draft some one-page briefs for my consulting engineers to outline what we would like to see in their specs regarding certain materials and systems. For example, letting the plumbing and civil engineers know that we prefer to eliminate PVC pipe and want them to specify alternatives like Polypropylene, cast iron, ABS, etc. The idea... Read more

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more