Product Review
The company's promotional material is the epitome of environmentally friendly packaging—like a Ben & Jerry's annual report. The article reprints sent were even bound in a jacket made from corrugated cardboard. So we were quite intrigued by the product. Syndecrete™ is a lightweight, pre-cast,... Read more
News Analysis
EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more
News Analysis
The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more
News Brief
At first glance,
An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more
Product Review
Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more
News Analysis
It isn’t just environmental zealots who are up in arms about the U.S. Forest Service’s policies on managing the nation’s timber resources. The Association of Forest Service Employees for Environmental Ethics has jumped into the fray—from the inside. Jeff DeBonis, the Association’s founder and executive director,... Read more
Feature
Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.
Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:
•Enhancing comfort by shielding the house... Read more
Op-Ed
Introducing the first issue of our newsletter.
Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more
Feature
Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more
News Brief
The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more
Feature
Susan Maxman is the first AIA president to make sustainable design a priority.
Q.Where would you say architects as a group stand on environmental issues?
A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more
Forum topic
Hi all!
I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more
Forum topic
Join your peers and BuildingGreen February 22–26, 2021 for an all you can eat buffet week of networking, problem solving, and connecting with sustainability leaders within your industry and across the Peer Networks! During this week we will create a space for you to offer and receive support, exchange ideas and resources, and become stronger,... Read more
Forum topic
Hi everyone,
Happy new year!
The FIRST First Friday Fika* of 2024 is happening this Friday, January 5th from 11am to 12pm ET, hosted by Candace Pearson.
Here is the registration link for the Fikas, or if you've registered previously, you can use the same link for this week.
We look forward to seeing you Friday!
... Read moreForum topic
Hello Sustainable Design Leaders,
On October 5th a number of us gathered for the Fall 2021 SDL Virtual Summit and the BuildingGreen team is happy to now share with you all the event report here!
This report can be shared publicly. If you think someone would like to see it, such as firm leadership or prospective Peer Networks... Read more
Forum topic
I took a first pass at content for the Energy Audit best practice, see the uploaded file.
Forum topic
Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more
Product Guide
CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.
Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

