Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

I'm working on the Best Practice pages, and I want to verify the role of "BITuser experts" (analogous to LEEDuser experts, as shown on this credit page). My questions:

Will we have BITuser experts? If so, will every Best Practice have an assigned expert, or will only some best practices have one?

Note that the role of the expert,... Read more

Team SCL,

This was a tough week. My husband coined a phrase "20% laid off."

Unfortunately, 50% of our business is currently impacted by governmental orders stating that our work is non-essential. This is bitter-sweet. I certainly want people to be safe, but we've had to make some tough decisions and in the geographies that were... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

... Read more

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hello SDL friends,

It has been an amazing opportunity to collaborate with so many of you through this group or through my work with Tally, the USGBC, ILFI, and in my role as an environmental researcher at KieranTimberlake. This is not so much a goodbye as it is a "hope to see you soon." I am making a shift away from building design into... Read more

Welcome to 2030 reporting season!

I brought up on the Fika today that there is a webinar December 5th to show updates to the DDx including the calculation of operational carbon from your energy data.  Below is a link to register.

https://aia.zoom.us/meeting/register/tZUocOutrTItHtWiySNMIqfGYv4ZbAhtjSg...

Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

I was recently asked if there is a way to quantify financially what one MT eCO2 might be worth in the context of a building owner reducing their own carbon emissions.  How do you put a dollar value on those reductions?  Does anyone have experience with that or can you point me to the correct resource to answer this question?

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

I'm going way outside of my skillset and comfort zone...venturing into HR territory to do an analysis of my company's benefits package to see if it meets exceeds or falls short of the requirements of Fitwel and WELL. Has anyone else done this within their organization? How was this received by your company's executive team?

When... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

Hi all,

Passing on a message from Julia Siple at AIA who is conducting a series of focus groups related to the AIA 2030 Commitment's DDx platform. You may have already received this from other channels but I thought I'd post here as well in case it got missed. They are looking for more participants in the morning and lunchtime (lunch... Read more

The deadline for submitting presentations is coming up. This year ASHRAE is hosting a joint conference with Simbuild. We are just about to send out an extension announcement (It is now Feb 9th) , so there is still time to get an abstract for a presentation. 

Possible ideas for topics: 

Daylight - new metrics and... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Hi all - at the suggestion of Nadav and some of the Sustainable MEP Leaders, I'm reposting a thread I started a couple days ago in the SMEP forum.

In response to increasingly aggressive (and effective) targeting of building owners (particularly schools), a group of researchers have put their support behind a letter warning against the... Read more