A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

Environmental, social, and governance (ESG) reporting is an increasingly common expectation throughout financial sectors, and the real estate industry is no exception. 

This live webinar with our friend Chris Pyke, Ph.D., a senior vice president... Read more

Hello Green Gurus,

Our next Peer Networks webinar is coming up in just two weeks! We’ll hear from the Indoor Air Quality Working Group, authors of the recently published whitepaper “Considerations for Continuous Air Quality Monitoring: Simple tips for getting it right, according to IAQ consultants”.

More details will be available... Read more

Welcome to the quiz portion of Stone, The Original Green Building Material.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how stone is natural and durable, emits no VOCs, requires almost no maintenance, and provides a connection to the earth and our history.
2.... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

Hi folks,

Mahesh announced today that he's leaving his position as CEO of USGBC, GBCI, and ArkScoru, effective Nov. 1. An interim CEO will be announced tomorrow.

I think that Mahesh did some great things for the organization(s)--and he had some really loyal team members. He could also be challenging to work with--as I learned... Read more

Hi - We have some projects within reasonable reach of ILFI's Zero Carbon Certification, which will require purchasing some off-site renewable energy. As a State Building Code Council member, I'm also eyeing the Zero Code which we will seriously consider in the next 12 months; this also requires a purchase of off-site renewable energy. 

I... Read more

Erika Heet is the Editor-in-Chief of BuildingGreen. She is the former Editor-in-Chief of Interiors magazine. She has held senior editor positions at Dwell and Architectural Digest, and is the author of two books on modern architecture. She has served on the boards of Greenbuild and the Sustainable Furnishings Council, as well as on juries for... Read more

In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Anyone else having this experience? We've got a LEED 2009 Core/Shell project that we've now been contracted to do a fitout within for one of the first tenants. If anyone else has had this experience and is willing to talk with me about how your process for it has gone, I'd be fantastically grateful.

Find me directly at awilson@asg-... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more