Quiz body

Hello Sustainable Advising Leaders,

Here are the notes from the last Zoom call. We had a great turnout! Looking ahead, now that things are rolling along we’d like to get into the rhythm of a regularly scheduled monthly call. Since Tuesdays seem to work well for most people, I am proposing the 4th Tuesday of the month from 3-4pm ET. That... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hello SD Leaders!

Two weeks ago a group of us gathered for the Winter 2020 Sustainable Design Leaders Summit. Those of us from BuildingGreen that were on site, greatly appreciated everyone's time and energy. It's always a pleasure to work along side you all!

Here is the summit report!

Reminder: We are giving a priority look... Read more

For those that missed Z's subtle mention of this a few weeks ago, Bora finally decided sustainability is important enough to have someone dedicated full-time to it, and then went out and got one of the best:

https://bora.co/bora-hires-sustainability-director-corey-squire/?tax=all-posts

I've been sharing Corey's thoughts on... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Hello good people and fabulous troublemakers,

PFAS is in everything. In May, the NY Times published an article about this, along with the governments work to remove it from drinking water. https://www.nytimes.com/2024/04/10/climate/six-things-to-know-about-forever-chemicals.html

As you may know, a working group has been gathering... Read more

Are your firms discussing the health effects of silica dust on people working with engineered stone and the recent announcement of the upcoming ban in Australia, as of July 2024?

https://www.dezeen.com/2023/12/14/australia-bans-engineered-stone-silico...

According to the article, a recent report says that there is no safe level of... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more

I can hear Kjell saying "All models are wrong, but some are useful." Having said that we are having trouble getting usuable predictive energy use information from our electrical design engineer. They are telling us that their energy models are not for accurate pEUIs but just to compare various scenarios. Are they being lazy? Should we push for... Read more