Hi All, wanted to share this webinar below :
The AIA 2030 Commitment and the Design Data Exchange (DDx) have transformed the way architecture firms collect project data on energy and carbon metrics, but it has never been a good place to visually understand these metrics. Architects tend to be visual people and have an intuitive... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Hi, we need 3-4 folks to volunteer to join us to work out a draft Materials section for the Contractors Commitment.  Meeting set for 6/16 @ 2 PM CST.

Please message me at pslloyd@leopardo.com if interested in participating.  I will forward out the meeting invite. If the time doesn't work, but you want to participate, I will share info in... Read more

The EC3 Tool has come up quite a few times in the Green Guru's conversations.  We're hosting an online review with Stacy Smedley and Mark Chen from Skanska.

Wednesday September 29th at 3pm PST

The tickets are free and this will be a Teams meeting.

https://www.eventbrite.com/e/using-the-ec3-tool-the-why-and-how-tickets-...... Read more

The BuildingGreen/GreenStep exam prep materials are... Read more

Hi Green Gurus,

In this stressful time, I think it is important for us to continue to feel connected and supported.  Also, it is difficult to come to terms with the reality of what is happening.  So, I thought it would be helpful for us to share some information about the response of our respective firms to the Coronavirus.

The... Read more

Axel Slowin

Posting for Kira Gould: 

Since his death on August 27, 2021, Lance Hosey has been missed by our community. We miss his voice and his vision -- as well as his collegiality and humor. Now, Columbia Graduate School of Architecture, Planning & Preservation announced the Lance Hosey Scholarship Fund to Make Things Better. We are pleased... Read more

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

Welcome to the quiz portion of Go with the Flows: The Promise and Peril of Hygrothermal Modeling

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the true role of hygrothermal modeling in design.
2. Name four instances in which to consider using hygrothermal modeling... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

This summit was pre-approved for 10 AIA HSW LUs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your... Read more

Hi All -

I'm wondering if any of our SDL people have a project case study on designing for deconstruction that they'd like to present on? I know there are a lot of conversations that we should be designing for deconstruction but has anyone done a focused project?  Thank you for any input you might have.

I'm sure many of you remember when Greenbuild 2020 was scheduled for the week of the presidential election and if was shifted back one day. 

If anyone has small kids and have gone to book your Greenbuild 2022 travel, you've potentially noticed (as I have) that I'll have to travel on 10/31 and will miss all Halloween activities with my... Read more

An induction range capable of replacing a standard gas range offers the potential of significantly reducing the energy required for ventilation in a commercial kitchen and improves IAQ at home.

We look for commercial-scale as well as residential induction cooktops and ranges designed to reduce indoor... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more