Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

Energy Source™ Directory

Energy Source Directory arrived. Assembled and published by Iris Communications, this is the most complete and most useful guide to specialized products and materials used in energy-efficient construction that we've seen. The 500-page directory is... Read more

The company's promotional material is the epitome of environmentally friendly packaging—like a Ben & Jerry's annual report. The article reprints sent were even bound in a jacket made from corrugated cardboard. So we were quite intrigued by the product. Syndecrete™ is a lightweight, pre-cast,... Read more

Carol Venolia, Publisher/Editor

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Hi everyone,

Registration for the 2025 Super Summit is live! Register here for the SDL Summit and save your seat to join us in Omaha. 

We’re also excited to announce the Pre-Summit Workshop for this year – “From Transactional to Transformative: Building Relationships for Change.” The workshop will be led by David Jay, author of... Read more

The sheer number of building product certifications and labels is overwhelming, and even those experienced with green labels can get exhausted trying to figure out which are relevant and which aren’t.

The confusion in the market over green labels can complicate efforts of both manufacturers and design professionals... Read more

After reviewing BP language today with internal staff, we realized we'll need to add a glossary to explain industry jargon and technical terms that might not be widely used. I'd like to consolidate those terms onto one web page, a glossary. This probably should be on the list with the best practices, and it will need its own page. Thanks!

Shamus Gumshoe

I'm working with the AIA Minneapolis chapter on guidance for small firms related to how and when to energy model. A lot of small firms would like to sign the AIA 2030 Commitment (we had 100 in a room in 2022 in a session led by Nadav and Gwen Fuertes). But we have learned that a) they don't have a good way to energy model small commercial to... Read more

Hi folks,

As you've no doubt heard from us by now (several times), in lieu of Summer Summits this year we're offering a combination of events this fall. Our series kicked off last week with a great Regional Mini-Summit in Boston. Regional events like this were in our plans before COVID blew everything up, so this one was a long-time... Read more