Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more

Hi Everyone, 

This is quite last minute (due tonight) but please see below for an opportunity to email comments to EPA supporting national building material reuse measurement/methodology. Submission is easy, just a short email supporting C&D/reuse and any other thoughts on what to include/exclude in material pathways for reuse beyond... Read more

Hi all,

We know preparations for Greenbuild are well underway for many of you. We also know that there will be many things competing for your time while you're there. Here's one more to consider! We don't have all the details solidified yet, but wanted you to know sooner rather than later for planning purposes.

We hope you’ll... Read more

Welcome to the quiz portion of Three Imperatives to Create the Future of Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why it's relevant to teach cross-disciplinary skills in the green building industry.
2. Detail the reasons for encouraging... Read more

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Hi everyone,

Thanks so much to those of you who presented at this years AIA Show & Tell, and thanks again to ZGF for hosting! Here are the slides for some of the presentations. Please do not share the slides outside of the networks unless they are marked "PUBLIC." Hope you enjoy!

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Has anyone documented the Food Alternatives credit as part of WELL or as an innovation credit in LEED?

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

Hello! 

We have several projects that are either pending ILFI Zero Carbon certification or the owner is planning to purchase offsets to cover construction emissions. Thus far, I have not considered this in our corporate footprint reporting. However, we are including A5 emissions whenever feasible and multiplying that performance over the... Read more

Hello everyone!

My role at Sundt Construction is both a Preconstruction Project Manager, and Chairman of the company's sustainability committee. I've been involved in green building since 2001 and have been in leadership roles in both the Arizona and Minnesota USGBC Chapters. I look forward to being an active member of this group.... Read more

Based on current projects, pursuits, and ongoing thought leadership, the following are hot topics across the Stantec Buildings group.

Read on to stay up to date with evolving skills and expertise not only in your own BC but also... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more