Hi SDL: sorry to send another missive so soon but I wanted all to be aware of a great new effort just announced today coming from Greg Kats and Vivian Loftness among others - The Smart Surfaces Coalition. This effort brings together resources and research around city-scale resilience. "The Coalition is committed to the rapid, cost-effective... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Welcome to the quiz portion of The Great Eight: High-Impact Material Choices for Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Specify green building materials in product categories that truly make a difference for human health, the environment, or both.
2. Conduct a... Read more

Welcome to the quiz portion of Existing Buildings Are Architecture’s Future!

Learning Objectives
Upon completing this course, participants will be able to:


Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.

Two books immediately came to mind for me:

How Building Learn, by Stewart Brand

https://en.wikipedia.org/wiki/How_Buildings_Learn

It was many years ago but reading Stewart Brand’s How... Read more

Hi Green Gurus,

In this stressful time, I think it is important for us to continue to feel connected and supported.  Also, it is difficult to come to terms with the reality of what is happening.  So, I thought it would be helpful for us to share some information about the response of our respective firms to the Coronavirus.

The... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Hi, we need 3-4 folks to volunteer to join us to work out a draft Materials section for the Contractors Commitment.  Meeting set for 6/16 @ 2 PM CST.

Please message me at pslloyd@leopardo.com if interested in participating.  I will forward out the meeting invite. If the time doesn't work, but you want to participate, I will share info in... Read more

As Building Green’s Finance Manager, Ashleigh is responsible for the development and analysis of financial strategic plans, operational budgets, and the development and analysis of associated performance indicators.  Additionally, in her day-to-day she oversees all areas of finance including: payroll, accounts payable and receivables, project... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!

You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more