Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Hello all, 

Any Fitwel experts out there? I have a 30,000 sf boutique hotel + spa client who would like to certify under the Fitwel rating system but Fitwel folks are telling me that no scorecard is currently available to hotel clients (can't use mulit-tenant or resi, that a hotel scorecard is under development). Has anyone used Fitwel... Read more

The High Performance Buildings Database (HPB) provides case studies of projects ranging from homes and commercial interiors to large buildings and even whole campuses and neighborhoods. These may be certified green projects, or simply projects that have one or more notable environmental features. We review each published case study to focus on... Read more

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

The results from the "CogFx" study are compelling, showing that people in environments with low VOCs and low ambient CO2 levels score higher on tests of cognitive function.  Specifically, they show that providing 40cfm of outdoor air per (actual live) occupant results in significantly higher scores than even the "Enhanced Ventilation" scheme... Read more

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

Hi Everyone, 

This is quite last minute (due tonight) but please see below for an opportunity to email comments to EPA supporting national building material reuse measurement/methodology. Submission is easy, just a short email supporting C&D/reuse and any other thoughts on what to include/exclude in material pathways for reuse beyond... Read more

Welcome to the quiz portion of Better Choices in Low-Slope Roofing.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain life-cycle impacts, health and environmental hazards, and durability of low-slope roofing options.
2. Classify situations for which reflective roofing... Read more

When BuildingGreen started publication in 1992, simply finding building products designed with environmental benefits in mind was a big challenge. 

In the years since we’ve seen rapid advances in green building materials and products, and manufacturers are beginning to take topics such as embodied carbon and social justice concerns—... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Water and electrical metering and submetering equipment provide valuable diagnostic information and verification of building energy and water usage.

Measuring Water Use

The Alliance for Water Efficiency recommends metering all new connections, retrofitting meters onto existing unmetered connections, and submetering all new... Read more

Welcome to the quiz portion of Introducing Fitwel v2.1!

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the purpose of the Fitwel standard, including how it advances the goals of health and well-being of building occupants—as well as public health.

2. List nine ways in... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hello Green Gurus,

We’re always trying to improve this online space, from adding an events calendar and 5-minute presentation recordings, to creating a filterable member directory. We have several other ideas in the works, and we’re looking for a group of Peer Network members to help us test them before they go live.

Requirements... Read more

Hello, fellow SDLs, 

I wanted to share an opportunity for you - or those in your network - to join a passionate team of architects and designers based in Anchorage, Alaska. I'm told that you'd be asked to join the full team in Anchorage a few times a year for team building events but otherwise you can WFW (work from wherever!).

I... Read more

Hello Green Gurus,

Here's another Peer Networks Webinar for September, Prospects for Sustainable Buildings in Congress. We hope you will join us!

Reminder: This webinar is for Peer Networks members only.

I'm waiting to confirm with the presenters whether this will be recorded. Watch this space for updates!

Register... Read more