As promised at the SDL Summer Summet: Hennepin County Energy & Environment's new Project Manager’s Guide to Material Reuse in Commercial Buildings, with specification language, guidance for procurement, and case studies of successful reuse projects around the country. This resource is meant to help owners, architects, and contractors... Read more

Hi Everyone!

I'm Emily, GCI General Contractor's Sustainability Manager in San Francisco. Nice to meet you all.

I started with the company in 2013 and since then we've doubled in employees. I have been handling sustainability solo, until about 8 months ago, when we hired Alejandra Arce Gomez full-time to help manage the... Read more

Good Morning everyone.  i just wanted to send Congratulations out to the new class of fellows, with a shout out to Jonathan Weiss, Paul Hutton, and Ramana Koti.

Well done Gentleman!

I know that there is a risk of starting a whole flurry of congrats through the forum, but this is a biggie, and deserves some recognition:

Congratulations Andrea and Melanie!! Huzzah!!

And a reminder--If you want to reach out to them privately, rather than through the forum, with your message, you can see anyone's email address by... Read more

Welcome to the quiz portion of Protect Your Spec: 14 Strategies. 

Learning Objectives
Upon completing this course, participants will be able to:


Identify ways to ensure continuity between the environmentally preferable materials in a project specification, and the less-than-ideal materials that end up used in the final... Read more

We apologize, but the heating fuel cost calculator is no longer on the BuildingGreen website.

Take a look at Efficiency Maine's heating fuel cost calculator instead.

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

The sheer number of building product certifications and labels is overwhelming, and even those experienced with green labels can get exhausted trying to figure out which are relevant and which aren’t.

The confusion in the market over green labels can complicate efforts of both manufacturers and design professionals... Read more

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Hi, folks! 

I was recently asked if BuildingGreen could connect prospective speakers to an event organizer in Chicago. Beyond the leaders in the BuildingGreen networks relayed, I wanted to share that the exercise led me to the Women and Climate speaker database: https://www.womenandclimate.co/speaker-database 

When filtering by... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Greetings Gurus!! I'm super excited to invite you all to help each other :)

As many of you know, BuildingEase (a completely free tool!) has been born this year, the newest function we just launched is the Crowdsourcing function.

Crowdsourcing lets anyone contribute products to a public Material List (similar to an Outline Spec)... Read more

Hi all,

HOK has ~75 WELL APs whose credentials will expire in 6-12 months, so we're starting to look into a more robust CMP program.  Do you have great sources of health + wellbeing education, particularly WELL-specific CEUs, that you would recommend (emphasis on free or very low cost)?  We are currently using GBES, BuildingGreen, and... Read more

Tomorrow is my last day at FXCollaborative before I head back to school. It has been such a gift to engage with you all over the past 10 years. Please stay in touch - my contact information is ilanajudah@gmail.com. I am headed out to UBC next week to do a deep dive into resilience and adaptation in urban environments.

FXCollaborative... Read more