It’s hard to believe COP28 is upon us. Kicking off tomorrow (11.30) and concluding 12.12, it’s sure to be a full few weeks of sharing, live streams, and interesting takes.

We’ve been excited to see a few Peer Network members represented as attendees in Architecture 2030’s (in-person and virtual) delegation.

Hello Sustainable Construction Leaders,

We’re happy to see the first round of registrations rolling in! If you haven’t yet, make sure to register here. And if you have any friends not currently in our Member Directory that you’d like to see at the Summit, encourage them to reach out to me (candace@buildinggreen.com). We’ll get them set... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.

An induction range capable of replacing a standard gas range offers the potential of significantly reducing the energy required for ventilation in a commercial kitchen and improves IAQ at home.

We look for commercial-scale as well as residential induction cooktops and ranges designed to reduce indoor... Read more

Wondering if anyone has a contact for good [sustainable] interactive water feature designer? A client is looking for a designer to add to our team and I figured this network would certainly have some insights. Project will be located in Omaha, NE. 

I don't have any direct affiliation with this role other than a former colleague asked if I would share the job posting for Director of Sustainability at Corgan with my network - that's you! She provided a little more context - they are obviously looking for someone with sustainability experience but are open to an up-and-comer who would be... Read more

Erika Heet is the Editor-in-Chief of BuildingGreen. She is the former Editor-in-Chief of Interiors magazine. She has held senior editor positions at Dwell and Architectural Digest, and is the author of two books on modern architecture. She has served on the boards of Greenbuild and the Sustainable Furnishings Council, as well as on juries for... Read more

Welcome to the quiz portion of Natural Ventilation: The Nine Biggest Obstacles and How Project Teams Are Beating Them

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the primary reasons to design a building for natural ventilation.
2. Understand how cost, comfort... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

The prepublication version of the AGC playbook is online now. I just stumbled on this this morning but thought it would be great to get eyes on this early and start a discussion here on any of the included guidance. Happy Reading, excited to follow the discussion!

AGC Playbook on Decarbonization and Carbon Reporting in the Construction... Read more

Greetings,

I posted this a while back on the MEP SDL forum but also wanted to appeal to the broader community.  We need help gathering existing plug/process load data.  We know it is out there!  Two golden stars to Becky Alexander from LHB who reached out to us after this month's meet-up with some useful material.  We need more!  Please... Read more