Feature
Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.
Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:
•Enhancing comfort by shielding the house... Read more
Feature
Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more
Feature
Susan Maxman is the first AIA president to make sustainable design a priority.
Q.Where would you say architects as a group stand on environmental issues?
A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more
News Brief
The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more
Forum topic
All, today is the day I had committed to sending out the DRAFT request to equipment manufacturers of what is needed for full electrification. I apologize that I didn't have time or focus to get my thoughts together till now (I had intended to share this with Chris and others prior to sending to the full group, but just didn't get my thoughts... Read more
Forum topic
Does anyone know about temporary flushout equipment that could be used to augment a building's systems to get additional CFM of OA during construction? For our non-laboratory type projects the flushout period ends up being too long, especially in either humid summers or frigid winters (Pennsylvania).
Hoping that some of you on either... Read more
Forum topic
Hi folks,
I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more
Forum topic
EDITED LINK
Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more
Forum topic
Hi All -
I have a non-profit project that has a lot of wood structure to it, but the truss suppliers have both said they cannot get FSC wood for the project.
So, looking at the Legal Wood Pilot Credit, I need some help. Can anyone tell me where i can find the definitions between "legal", "responsible" and "certified" are? (I'm... Read more
Forum topic
Hi all,
The Sustainable MEP Leaders are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic, the current draft letter is attached. In a similar manner as the... Read more
Reports, Courses, Study Guides, Live Webinars
Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar.
Contractors are just... Read more
Forum topic
Extremely proud to say that the just-announced winner of the international 'Next Generation Facade' design competition is a team led by the 2017-18 EDR Research Fellow, Liz McCormick. The facade normally separates inside from outside. What if the 'facade' was a place you occupied, where you worked? What if different parts of the facade... Read more
Forum topic
Hi all,
For your planning purposes for next year, here’s info on an in-person event coming up in 2024:
We are excited to announce that we will be hosting an all-peer-networks workshop for SMEPL, SDL, and SCL members at Miller Hull’s office in Seattle on July 15, 2024. We’re still working out the details, but given the recent... Read more
Forum topic
I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more
Basic page
FILTER BY NETWORK
All (Green Gurus) Sustainable Design Leaders Sustainable Design Leaders - Small Firm Sustainable Construction Leaders Sustainable MEP Leaders Sustainable Advising LeadersFILTER BY REGION
... Read moreQuiz
Welcome to the quiz portion of The PVC Debate: A Fresh Look
Learning Objectives
Upon completing this course, participants will be able to:
1. Catalog the history of PVC in the building industry.
2. Recount the connections between PVC and chlorine, dioxins, mercury, and vinyl chloride.
3. Explain the... Read more
Forum topic
In trying to help a client write a case study on avoided carbon by using slag and flyash, I am having trouble finding a one for one equivalency that can be verified.
I have found for one pound of flyash, one pound of carbon is saved - but I can't verify that.
Appreciate the feedback!

