Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Hello - I seem to remember a thread on Sustainable Design Specialist / Advisor - Focused or Integrated Position within a firm. Does anyone remember the subject header or did I just dream this up? My searches are coming up empty...

Thanks!

Mona

Mona Lemoine, Architect AIBC, MAA, MRAIC, LFA, LEED AP BD + C

Senior... Read more

Hi all,

BG WebDev needs to clarify the Forum comment moderation rules you would like us to put in place.  We do not require moderation for premium users in our LEEDuser forum unless they include a link in their submitted topic or comment. In this case, we hold the publication of the comment in moderation until we can make sure the link... Read more

All,

My team at WSP has a pretty awesome senior position available and I wanted to bring it the group's attention as we try to get the word out. The role is to lead our Sustainable Design Analytics group (part of our Built Ecology team), ideally based in CA or NYC, but open to wherever good candidates may be. If anyone knows someone that... Read more

Asking for a colleague:

"Have you ever had a large number of fire retardant tarps used to temporarily enclose a building during construction? Do you know of any solutions for recycling/reusing them or another product that doesn't use toxic fire-retardants that meets the performance criteria?"

I think we've all seen poly or fabric... Read more

Join Brent & Alex to learn what's new and what's been updated in our BuildingGreen Guide to Thermal Insulation, Fourth Edition, including what you should know about:

So much has changed so quickly!

Our 30-minute roundtable... Read more

Hi all,

Has anyone been able to find alternatives to vinyl window film products? I can find solutions for wall coverings, but am not having much luck when it comes to window films. Any leads or insight would be really helpful!

Thank you!

Amanda

I'm still basking in the glow of yet another great Summit. I hope others who were there are feeling the same.

Here are the flip-chart pages from the many round-table conversations. Five-minute presentations to come shortly, followed by the Summit Report.

Feel free to use this thread to share other resources and thoughts.

... Read more

Hi SDL Group -

Moody Nolan is actively seeking a new hire to help support our sustainability needs!

If you know of any interested parties, please have them visit the Moody Nolan webpage and select 'Careers' at the bottom of the homepage. Our available position is listed as the 'Sustainable Design Facilitator' role.  http://... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Welcome to the quiz portion of In-House Daylight Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain general daylighting theory and design.
2. Simulate towards better daylighting design.
3. Demonstrate how daylight modeling is used in practice.
4.... Read more

I really appreciated our day on Tuesday--seems that we had a great inaugural Summit, and covered a lot of important ground. 

Here are the raw notes (flip-chart pages) from the day. Some of us came away with Action Items--see the list on the last page. 

Five-minute presentation decks and a more polished report to follow shortly. We... Read more